Module:WikidataIB
Note to editors: Please don't categorize this template by editing it directly. Instead, place the category in its documentation page, in its "includeonly" section.
This module is designed specifically to implement a mechanism which moves control of whether Wikidata values are used in an infobox from the template coder at the infobox design level to the editor at the article level. It is only intended to be used inside an infobox.
Module | |
---|---|
Main | Module:WikidataIB |
Overview
The module provides these calls specifically for use in infoboxes at present:
getValue
- obsoleted: usegetPreferredValue
getValue|rank=best
instead.
getCoords
getQualifierValue
getValueByQual
getValueByLang
The obsolete call getSourcedValue has now been removed as it is redundant to getValue which can do the same job using the |onlysourced=true
parameter (which is set by default).
There are also these utility calls:
getLink
getLabel
getAT
getDescription
pageId
formatDate
checkBlacklist
emptyor
labelorid
getLang
getQid
Example form of each call:
{{#invoke:WikidataIB |getValue |<PropertyID> |name=<fieldname> |suppressfields=<list of fields which will never display> |fetchwikidata=<list of fields to fetch values from Wikidata> |onlysourced=<yes/no> |noicon=<yes/no> |df=<dmy/mdy/y> |bc=<BC/BCE> |qual=<ALL/DATES/P999> |list=<ubl/hlist/prose> |linked=<yes/no> |<local parameter>}}
{{#invoke:WikidataIB |getCoords |name=<fieldname> |suppressfields=<list of fields which will never display> |fetchwikidata=<list of fields to fetch values from Wikidata> |<local parameter>}}
{{#invoke:WikidataIB |getQualifierValue |<PropertyID> |pval=<ID of target value for the property> |qual=<qualifier ID for that target value> |name=<fieldname> |suppressfields=<list of fields which will never display> |fetchwikidata=<list of fields to fetch values from Wikidata> |onlysourced=<yes/no>}}
{{#invoke:WikidataIB |getValueByQual |<PropertyID> |qualID=<qualifier property ID to match> |qvalue=<QID of target value for the qualifier property> |name=<fieldname> |suppressfields=<list of fields which will never display> |fetchwikidata=<list of fields to fetch values from Wikidata> |onlysourced=<yes/no>}}
{{#invoke:WikidataIB |getValueByLang |<PropertyID> |lang=<language code to match> |name=<fieldname> |suppressfields=<list of fields which will never display> |fetchwikidata=<list of fields to fetch values from Wikidata> |onlysourced=<yes/no>}}
Function getValue
Parameters to getValue
Name | Alias | Function | Default |
---|---|---|---|
(first unnamed) | 1 | The property-ID whose values are returned. Required. | |
(second unnamed) | 2 | A locally supplied value that, if it is not empty, will be returned in preference to the value on Wikidata. | empty |
qid | The Q-number (entity-ID) of the entity that the property belongs to. If not supplied or empty, defaults to the associated Wikidata entry of the current page – uses mw.wikibase.getEntityIdForCurrentPage(). | Item id for current page | |
rank | [Case insensitive] When set to best , returns preferred values if present, otherwise returns normal values. When set to preferred returns preferred values. When set to normal , returns normal values. When set to deprecated returns deprecated values. Any parameter value beginning with "b" is "best"; beginning with "p" is "preferred"; beginning with "n" is "normal"; beginning with "d" is deprecated. Multiple values are allowed: "p n d" would return all ranks. "Best" overrides the other flags. Other values are ignored and if no ranks are requested, preferred and normal are returned.
|
preferred and normal | |
qual | The property-ID of a qualifier that is to be returned in parentheses after the property. Setting qual=ALL returns all qualifiers. Setting qual=DATES returns and
with a date separator. |
none | |
fetchwikidata | fwd | List of fields to fetch values from. ALL fetches all fields. A value of NONE or blank or omitting the parameter fetches no fields.
|
none |
suppressfields | spf | List of fields which will never display. This will even force a local value in the field not to display. | none |
name | Name of the field. When encoding an infobox, this is the name that fetchwikidata and suppressfields will recognise. Required if fetchwikidata or suppressfields is specified (except when fetchwikidata=ALL ).
|
nil | |
onlysourced | osd | A boolean which will filter out Wikidata values that are unsourced or only sourced to Wikipedia. Values no , false and 0 are all false; anything else is true.
|
true |
df | Date format: may be dmy (day before month) or mdy (month before day) or y (year alone).
|
dmy | |
bc | Format of the BC/BCE suffix for dates. | BCE | |
linked | A boolean that enables the link to a local page via its sitelink on Wikidata. Values no , false and 0 are all false; anything else is true.
|
true | |
wdlinks | wdl | A boolean that enables the display of links to Wikidata when no local article exists. Values no , false and 0 are all false; anything else is true.
|
false |
unitabbr | A boolean that enables unit abbreviations for common units. Values no , false and 0 are all false; anything else is true.
|
false | |
maxvals | Sets the maximum number of values to be returned when multiple values are available. Setting it to 1 is useful where the returned string is used within another call, e.g. image. Values 0 and empty return all values.
|
0 (all) | |
collapse | Sets the maximum number of values to be returned before the content is auto-collapsed. Values 0 and empty allow all content to be displayed uncollapsed.
|
0 (all) | |
linkprefix | A link prefix that is prepended to the linked value when linked. Applies only to items that have articles and to strings (e.g. url). It triggers linking of strings. Any double-quotes " are stripped out, so that spaces may be passed. | empty | |
linkpostfix | A link postfix that is appended to the linked value when linked. Applies only to items that have articles and to strings (e.g. url). It triggers linking of strings. Any double-quotes " are stripped out, so that spaces may be passed. | empty | |
prefix | A prefix that is prepended to the displayed value of strings (e.g. url). Any double-quotes " are stripped out, so that spaces may be passed. | empty | |
postfix | A postfix that is appended to the displayed value of strings (e.g. url). Any double-quotes " are stripped out, so that spaces may be passed. | empty | |
qlinkprefix | Qualifier link prefix (see linkprefix). | empty | |
qlinkpostfix | Qualifier link postfix (see linkpostfix). | empty | |
qprefix | Qualifier prefix (see prefix). | empty | |
qpostfix | Qualifier postfix (see postfix). | empty | |
sorted | A boolean which enables sorting of the values returned. Values no , false and 0 are all false; anything else is true.
|
false | |
qsorted | A boolean which enables sorting of the qualifier values within each item returned. Values no , false and 0 are all false; anything else is true.
|
false | |
noicon | A boolean which will suppress the trailing "edit at Wikidata" pen-icon. Useful for when the returned value is to be further processed. Values no , false and 0 are all false; anything else is true.
|
false | |
list | The name of a template that the list of multiple values is then passed through. Examples include "hlist" and "ubl". Setting it to "prose" produces something like "1, 2, 3, and 4" | none | |
sep | Customises the string that is used to separate multiple returned values. Any double-quotes " are stripped out, so that spaces may be passed. If nothing or an empty string is passed it is set to the default list separator (", " in English). | ", " | |
qsep | Customises the string that is used to separate multiple returned qualifier values. Any double-quotes " are stripped out, so that spaces may be passed. If nothing or an empty string is passed it is set to the default list separator (", " in English). | ", " | |
format | Determines whether global coordinates should be rendered as degree/minute/second or as decimal degrees. Any value beginning "dec" (case insensitive) will render as decimal. Anything else will render as DMS. | dms | |
show | Determines how global coordinates should be returned. The value "longlat" will return longitude, latitude . Any other value beginning "lon" (case insensitive) will return just longitude. Any value beginning "lat" (case insensitive) will return just latitude. When used with |noicon=true , all of these will be pure numbers in decimal degrees (signed: N and E as positive), which are intended for use in mapping templates, etc. Anything other value (or nothing) will render the usual coordinate values as DMS or decimal with "NSEW" qualifiers, etc.
|
empty | |
lang | Allows an unlinked value to be returned in the chosen language. Takes a standard ISO language code recognised by MediaWiki. If not supplied or blank, the local language (or set language for multi-lingual wikis) is used as normal. | local language |
Base parameters
- getValue can also take a named parameter
|qid=
which is the Wikidata ID for an article. This will not normally be used as omitting it defaults to the current article. - The property whose value is to be returned is passed in the first unnamed property and is required.
- The second unnamed parameter, if supplied, will become the returned value and no call to Wikidata will be made.
Whitelist and blacklist
- The name of the field that this function is called from is passed in the named parameter
|name=
, which is first checked against a blacklist of fields that are never to be displayed, (i.e. the call must return nil in all circumstances). If the field is not on the blacklist, it is then checked against a whitelist. If the name of the field matches, the call will return any locally supplied value if it is supplied as the second unnamed parameter, or the Wikidata value otherwise. - The name is compulsory when the blacklist or whitelist is used, so the module returns nil if it is not supplied, other than when
|fetchwikidata=ALL
. - The blacklist is passed in the named parameter
|suppressfields=
- The whitelist is passed in the named parameter
|fetchwikidata=
Sourcing
The getValue function will accept a boolean parameter onlysourced
which will suppress return of Wikidata values that are unsourced or only sourced to Wikipedia. The absence of the parameter, an empty parameter (|onlysourced=
) and the empty string (""
) all default to true (i.e. only referenced values are returned). The values no
, false
and 0
are treated as false (i.e. all values are returned); any other value is true (although |onlysourced=yes/no
is recommended for readability).
Link to Wikidata
The getValue function will accept a boolean parameter noicon
which will suppress the trailing "edit at Wikidata" icon and link for cases when the returned value is to be further processed by the infobox (e.g. a url). The absence of the parameter or an empty parameter (|noicon=
) default to false (i.e. the icon is added). The empty string (""
) and the values no
, false
and 0
are treated as false; any other value is true (although |noicon=true
is recommended for readability).
Dates
In order to handle the requirement for dates in mdy, dmy or just year formats, getValue accepts a named parameter |df=
that may take the values "dmy", "mdy", or "y" - default is "dmy".
As an article may require either of suffixes BC and BCE, getValue accepts a named parameter |bc=
that may take the values "BC", or "BCE" - default is "BCE".
Ranks
The |rank=
parameter, when set to preferred, returns only preferred values; when set to normal, returns only normal values; when set to deprecated, returns only deprecated values. If the parameter is set to best, it returns preferred values if present, otherwise normal values. Any parameter value beginning with "p" is "preferred"; any parameter value beginning with "n" is "normal"; any parameter value beginning with "d" is "deprecated"; any parameter value beginning with "b" is "best". Combinations of values are allowed, e.g. |rank=p n
returns all the preferred and normal values (which is the default), although "best" overrides any other parameters.
Specific value-type handlers
The module has specific handlers for the following data types:
- Items that correspond to an article in some Wikipedia, called "wikibase-items". These will be linked to the corresponding (and disambiguated) article on English Wikipedia where possible.
- Items that represent dates. These may be centuries, years, years and months, or years, months and days.
- Items that represent Commons media, urls, external ids, or other sorts of plain text.
- Items that represent quantities. All of these may have an associated unit, or be dimensionless, and may have a range.
- Items that represent global coordinates. These will be in degrees of latitude and longitude and will have an associated precision.
Items that represent other types of data are not handled at present.
The third class of data types may be used with the parameters:
|prefix=
,|postfix=
,|linkprefix=
,|linkpostfix=
|linkprefix=
or |linkpostfix=
, then just |prefix=
and |postfix=
are used. For example, when getting the in“P717”
“Q532127”
{{#invoke:WikidataIB/sandbox|getValue|P717|fetchwikidata=ALL|onlysourced=no |prefix="before " |postfix=" after" |qid=Q532127}}
→ Script error: No such module "WikidataIB/sandbox".
Use double-quotes to enclose the parameter value if it has leading or trailing spaces (otherwise they are stripped out). If you supply |linkprefix=
or |linkpostfix=
, then all four parameters are used and a link is made for each value like this:
[[ linkprefix WikidataValue1 linkpostfix | prefix WikidataValue1 postfix]], [[ linkprefix WikidataValue2 linkpostfix | prefix WikidataValue2 postfix]], etc.
in“P717”
“Q532127”
we can make the links:
{{#invoke:WikidataIB/sandbox|getValue|P717|fetchwikidata=ALL|onlysourced=no |prefix= |postfix= |linkprefix="List of observatory codes#" |linkpostfix= |qid=Q532127}}
→ Script error: No such module "WikidataIB/sandbox".
The parameters |prefix=
, |postfix=
, |linkprefix=
, |linkpostfix=
are also applied to wikibase-items if they are linked.
Formatting multiple returned values
|sorted=<yes|no>
is a boolean passed to enable sorting of the values returned. No parameter, or an empty string, or "false", or "no", or "0" disables sorting. It's only a very dumb alphabetical sort and sorts linked values as "[[ ..."|sep=<separator characters>
allows the separator between multiple returned values to be defined. The default is", "
(comma plus normal space). If the separator has leading or trailing spaces, enclose it in double quotes (e.g.|sep=" - "
). Any double quotes are stripped from the separator. The pipe character (|
) must be escaped as{{!}}
. For reasons of accessibility (see ), do not use|sep=<br>
for vertical unbulleted lists; use|list=ubl
instead.|list=<hlist|ubl>
allows multiple returned values to be displayed as a horizontal list (|list=hlist
), or a vertical unbulleted list (|list=ubl
). These override the separator and do not display the 'pen icon' linked to "Edit at Wikidata"
Limiting the returned values
“P18”
, but may have multiple values on Wikidata. Setting |maxvals=1
will limit the number of values returned to 1. Any other value is possible and functions as expected, but zero is treated as "no limit".
Unlinking
A returned value that represents an article on the local wiki will be linked by default. This includes redirects, but not dab pages. Sometimes there is a need not to link that returned values and this may be accomplished by setting |linked=no
.
Unit abbreviations
When the returned value is a quantity, the name of the units in which it is expressed is appended. Infoboxes may wish to use abbreviations instead for common units. This can be done by setting |unitabbr=true
.
Qualifiers
|qual=
may be supplied, which will return qualifiers of the required property, if they exist. If the value is set to a property id (P12345), then only the values of qualifiers with that property will be returned. If the value is set to |qual=ALL
, then all of the qualifier values are returned. If the value is set to |qual=DATES
then the and the“P580”
“P582”
of the property are returned with a date separator. In each case, any qualifier values returned follow the property value, and are enclosed in parentheses. If multiple qualifier values are returned, they will be separated by commas by default, although the separator can be changed by specifying|qsep=
(which may be enclosed in double-quotes, which are stripped out, so that spaces can be included). Setting the parameter|qsorted=yes
will sort the returned qualifier values alphanumerically.
Short form of parameters
Some of the longer parameters may be abbreviated to make infobox designs more compact:
fwd → fetchwikidata
osd → onlysourced
spf → suppressfields
wdl → wdlinks
Wrapper template
The template {{wdib}} can be used as a convenient wrapper for {{#invoke:WikidataIB |getValue}}
.
Other main functions
Function getPreferredValue
The getPreferredValue function works exactly like getValue, taking the same parameters, but if any values for a property have the preferred rank set, it will only return those values. This is now deprecated in favour of getValue|rank=best
.
Function getCoords
- getCoords can also take a named parameter
|qid=
which is the Wikidata ID for an article. This will not normally be used as omitting it defaults to the current article. - The first unnamed parameter, if supplied, will become the returned value and no call to Wikidata will be made.
- The coordinates from Wikidata are parsed and passed to Template:Coord which returns the display as if it were called manually.
- The blacklist of fields that are never to be displayed, and the whitelist are implemented in the same way as for getValue using
|suppressfields=
and|fetchwikidata=
Function getQualifierValue
The getQualifierValue function is for use when we want to fetch the value of a qualifier. We need to know the property and the value of the property that the qualifier relates to. The parameters are:
- The property ID passed in the unnamed parameter (or
|1=
) - The target value for that property in
|pval=
- The qualifier ID for that target value in
|qual=
- The same parameters to implement whitelisting and blacklisting of the property as in getValue
- Optional boolean to specify whether only sourced values of the property are returned (defaults to "no") in
|onlysourced=
- Optional item ID for arbitrary access in
|qid=
- The same parameters to format output as in getValue
Example of getQualifierValue
there is a property“Q1513315”
, which has a value“P793”
. That has two qualifiers,“Q385378”
and“P580”
“P582”
. To get the start date:
{{#invoke:WikidataIB |getQualifierValue |P793 |pval=Q385378 |qual=P580 |name=xyz |fetchwikidata=ALL }}
In w:South Pole Telescope it returns:
Function getValueByQual
The getValueByQual function returns the value of a property which has a qualifier with a given entity value. The parameters are:
- The property ID passed in the unnamed parameter (or
|1=
) - The property ID for a qualifier (or "ALL" or "DATES") in
|qualID=
- The Wikibase-entity ID of a value for that qualifier in
|qvalue=
- The same parameters to implement whitelisting and blacklisting of the property as in getValue
- Optional boolean to specify whether only sourced values of the property are returned (defaults to "no") in
|onlysourced=
- Optional item ID for arbitrary access in
|qid=
- The same parameters to format output as in getValue
Example of getValueByQual
there is a property“Q10990”
that has multiple values, each of which has a qualifier“P443”
. We can return the property value whose qualifier has the value“P407”
“Q7979”
{{#invoke:WikidataIB |getValueByQual |qid=Q10990 |P443 |qualID=P407 |qvalue=Q7979 |fwd=ALL |osd=no |noicon=true}}
→ Script error: No such module "WikidataIB/sandbox".
Function getValueByLang
“P407”
whose value has the given language code. The parameters are:
- The property ID passed in the unnamed parameter (or
|1=
) - The MediaWiki language code to match the language whose code is given by
|lang=xx[-yy]
. If no code is supplied, it uses the default language. - The same parameters to implement whitelisting and blacklisting of the property as in getValue
- Optional boolean to specify whether only sourced values of the property are returned (defaults to "no") in
|onlysourced=
- Optional item ID for arbitrary access in
|qid=
- The same parameters to format output as in getValue
Utility functions
Function getLink
getLink has the qid of a Wikidata entity passed as the first unnamed parameter or as |qid=
If there is a sitelink to an article on the local Wiki, it returns a link to the article with the Wikidata label as the displayed text. If there is no sitelink, it returns the label as plain text. If there is no label in the local language, it displays the qid instead.
- Wikidata:
“Q29016906”
“Q3621491”
{{#invoke:WikidataIB |getLink |Q29016906}}
→ Corisca and the Satyr{{#invoke:WikidataIB |getLink |Q3621491}}
→ archaeologist
Function getLabel
getLabel has the qid of a Wikidata entity passed as the first unnamed parameter or as |qid=
It returns the Wikidata label for the local language as plain text. If there is no label in the local language, it displays the qid instead. Note that this is the label given to the Wikidata entry in the same language as the current Wiki, if the label exists.
- Wikidata:
“Q29016906”
“Q3621491”
{{#invoke:WikidataIB |getLabel |Q29016906}}
→ Corisca and the Satyr{{#invoke:WikidataIB |getLabel |Q3621491}}
→ archaeologist
Function getAT
getAT has the qid of a Wikidata entity passed as the first unnamed parameter or as |qid=
If there is a sitelink to an article on the local Wiki, it returns the sitelink as plain text, i.e. the article title. If there is no sitelink, it returns nothing. Note that this is the title of the article in the current Wikipedia, if the interlanguage link exists in the Wikidata entry.
- Wikidata:
“Q29016906”
“Q3621491”
{{#invoke:WikidataIB |getAT |Q29016906}}
→{{#invoke:WikidataIB |getAT |Q3621491}}
→
Function getDescription
getDescription has the qid of a Wikidata entity passed as |qid= (it defaults to the associated qid of the current article if omitted). It has a local parameter passed as the first unnamed parameter. Any local parameter passed (other than "Wikidata" or "none") becomes the return value. It returns the article description for the Wikidata entity in plain text if the local parameter is "Wikidata". Nothing is returned if the description doesn't exist or "none" is passed as the local parameter.
- Wikidata:
“Q29016906”
“Q3621491”
{{#invoke:WikidataIB |getDescription |qid=Q29016906 |wikidata}}
→ painting by Artemisia Gentileschi{{#invoke:WikidataIB |getDescription |qid=Q29016906 |A painting}}
→ A painting{{#invoke:WikidataIB |getDescription |qid=Q29016906 |none}}
→{{#invoke:WikidataIB |getDescription |qid=Q3621491 |wikidata}}
→ person studying human activity in the past{{#invoke:WikidataIB |getDescription |qid=Q3621491 |A profession}}
→ A profession{{#invoke:WikidataIB |getDescription |qid=Q3621491 |none}}
→
Function formatDate
formatDate accepts a datetime of the usual format from mw.wikibase.entity:formatPropertyValues, like "1 August 30 BCE" as parameter 1 and formats it according to the df (date format) and bc parameters.
{{#invoke:WikidataIB |formatDate | 1 August 30 BCE |bc=BCE |df=dmy}}
→ 1 August 30 BCE{{#invoke:WikidataIB |formatDate | 1 August 30 BCE |bc=BC |df=mdy}}
→ August 1, 30 BC- df = "dmy" / "mdy" / "y" - default is "dmy"
- bc = "BC" / "BCE" - default is "BCE"
Function checkBlacklist
checkBlacklist allows a test to check whether a named field is allowed. It returns true if the field is not blacklisted (i.e. allowed) It returns false if the field is blacklisted (i.e. disallowed)
Example:
{{#if:{{#invoke:WikidataIB |checkBlacklist |name=nationality |suppressfields=residence; nationality; citizenship}} | not blacklisted | blacklisted}}
→ not blacklisted{{#if:{{#invoke:WikidataIB |checkBlacklist |name=birth_place |suppressfields=residence; nationality; citizenship}} | not blacklisted | blacklisted}}
→ not blacklisted
Function emptyor
emptyor returns nil if its first unnamed argument is just punctuation, whitespace or html tags otherwise it returns the argument unchanged (including leading/trailing space).
If the argument could contain "=", then it must be called explicitly:
| 1 = whatever-the-argument-is
In that case, leading and trailing spaces are trimmed.
It finds use in infoboxes where it can replace tests like:
{{#if: {{#invoke:WikidataIB |getvalue |P99 |fwd=ALL}} | <span class="xxx">{{#invoke:WikidataIB |getvalue |P99 |fwd=ALL}}</span> | }}
with a form that uses just a single call to Wikidata:
{{#invoke |WikidataIB |emptyor |1= <span class="xxx">{{#invoke:WikidataIB |getvalue |P99 |fwd=ALL}}</span> }}
Function labelorid
labelorid is a public function to expose the output of labelOrId().
The Q-number (entity ID) is passed as |qid= or as an unnamed parameter.
It returns the Wikidata label for that entity or the qid if no label exists.
Function getQid
- getQid works with the current page and its associated Wikidata entry.
- It returns qid, if supplied as the first unnamed parameter or as
|qid=
; - failing that, the Wikidata entity ID of the "category's main topic (P301)", if it exists;
- failing that, the Wikidata entity ID associated with the current page, if it exists;
- otherwise, nothing
Function examine
examine provides a dump of the entire property given in the first unnamed parameter (or in |pid=
as a named alias) from the item given by the parameter 'qid', or from the item corresponding to the current page if qid is not supplied. It works in a similar manner to the Dump function, but only loads a single claim, rather than the whole Wikidata entry.
- Example:
{{#invoke:WikidataIB |examine |qid=Q1396889 |P50}}
Coding into an infobox
Typically, the getValue call will be invoked in an infobox definition, using appropriate template parameters. One simple implementation is given as an example in w:Template:Infobox book/Wikidata/Sandbox. As an illustration, the 'author' field in the infobox is coded like this:
| label2 = Author{{#if:{{{authors|}}}|s}} | data2 = {{#invoke:WikidataIB |getValue |P50 |name=author |fetchwikidata={{{fetchwikidata|}}} |suppressfields={{{suppressfields|}}} |{{{authors|{{{author|}}}}}} }}The property to be fetched is the first unnamed parameter. In this case it is
“P50”
.
The name of the field is passed in |name=
and that name is checked against the blacklist and the whitelist. To always suppress the author field in a particular article, an editor will set |suppressfields=author
in the infobox. The author field will then never be displayed.
If the field is not blacklisted, then the infobox can be set to display a locally supplied value for author simply by setting |author=George Orwell
, for example, in the infobox. It also accepts |authors=
. If the name of the field is on the whitelist, e.g. |fetchwikidata=author; genre; pub_date; pages; dewey; congress
, and the local value is not supplied, then the infobox will display the value retrieved from Wikidata. Any separators can be used, except | and {}.
As a shorthand, |fetchwikidata=ALL
will fetch all of the fields that are not blacklisted, as long as no local value is already provided in the article for a given field.
Example of calls in an infobox
Basic use of getValue:
{{#invoke:WikidataIB |getValue |P000 |name=fieldname |qid={{{qid|}}} |fetchwikidata={{{fetchwikidata|}}} |onlysourced={{{onlysourced|}}} |{{{localparameter|}}} }}
Full collection of parameters:
{{#invoke:WikidataIB |getValue |P000 |name=fieldname |qid={{{qid|}}} |suppressfields={{{suppressfields|}}} |fetchwikidata={{{fetchwikidata|}}} |onlysourced={{{onlysourced|}}} |noicon={{{noicon|}}} |wdl={{{wikidatalink|}}} |df={{dateformat|}} |bc={{{bc|}}} |prefix= |postfix= |linkprefix= |linkpostfix= |sorted={{{sorted|}}} |sep={{{separator|}}} |list={{listtype|}}} |{{{localparameter|}}} }}
Any of the parameters can, of course, be fixed for a given field in an infobox, rather than taking the parameter supplied to the infobox, which will affect all fields. For example, one field may set |list=hlist
where a series of short words is expected; whereas another field could use |list=ubl
where an unbulleted vertical list of several words on each line is required.
Coordinates
The getCoords call will display the output of Template:Coord when supplied with the coordinates returned from Wikidata. It can be coded like this:
|label20 = Coordinates | data20 = {{#invoke:WikidataIB |getCoords |name=coordinates |suppressfields={{{suppressfields|}}} |fetchwikidata={{{fetchwikidata|}}} |{{{coordinates|}}} }}
An example is w:Template:Infobox biosphere reserve
{{Infobox biosphere reserve | fetchwikidata = ALL }}
Displays coordinates in the usual positions when used in an article where Wikidata has coordinates.
Upgrading existing infoboxes
Since the parameter |fetchwikidata=
is needed for any Wikidata functionality, an existing infobox may be replaced by an infobox incorporating these calls without any change whatsoever to any article. Each article using the new infobox can later be enabled by supplying |fetchwikidata=ALL
, or a list of required fields for that article. At that point, the onus is on the editor enabling the functionality to check that no unwanted fields are now being displayed. If so, they can be added to a blacklist for the article by setting |suppressfields=
to the list of unwanted fields.
Verifiability
Where it will always be essential for a particular field to only contain values that are referenced, use getValue
, making sure that |onlysourced=
is not set to 'false', '0' or 'no'. By default it will exclude values that are unsourced or only sourced to a Wikipedia, thus making the job of checking easier at the article level. If unsourced data is acceptable (!), set |onlysourced=no
. As it is beyond my wit to produce an automated mechanism that knows whether an existing source is reliable or not in a given context, that job must still be performed at the article level by an editor familiar with the subject. It should always be done when first enabling Wikidata for that article.
Example of use: Infobox book
This section is taken from w:Template:Infobox book/Wikidata/Sandbox/doc.
No Wikidata
{{Infobox book/Wikidata/Sandbox | suppressfields = | fetchwikidata = | name = Animal Farm | title_orig = Animal Farm: A Fairy Story | image = Animal Farm - 1st edition.jpg | image_size = 200px | caption = First edition cover | author = [[George Orwell]] | country = United Kingdom | language = English | genre = Political satire }}
Works as a non-aware infobox: only locally supplied parameters are displayed.
{{Infobox book/Wikidata/Sandbox | name = Animal Farm | title_orig = Animal Farm: A Fairy Story | image = Animal Farm - 1st edition.jpg | image_size = 200px | caption = First edition cover | author = [[George Orwell]] | country = United Kingdom | language = English | genre = Political satire }}
The blacklist and whitelist can be omitted if unused
All Wikidata
{{Infobox book/Wikidata/Sandbox | fetchwikidata = author; genre; pub_date; pages; dewey; congress }}
Fetches the author, publication date, number of pages, Dewey index, and Library of Congress catalogue number values from Wikidata.
{{Infobox book/Wikidata/Sandbox | fetchwikidata = ALL }}
As shorthand, the |fetchwikidata=
parameter can be set to ALL to fetch all available fields.
Any field can be suppressed by naming it in |suppressfields=
, or overridden by supplying a local value.
Never display genre
{{Infobox book/Wikidata/Sandbox | suppressfields = genre | fetchwikidata = author; genre; pub_date; pages; dewey; congress }}
The genre field will always be suppressed, even if a local value is supplied.
{{Infobox book/Wikidata/Sandbox | suppressfields = genre | fetchwikidata = author; genre; pub_date; pages; dewey; congress | genre = Political satire }}
Local override
{{Infobox book/Wikidata/Sandbox | fetchwikidata = author; genre; pub_date; pages; dewey; congress | genre = Political satire }}
The genre field is set to display "Political satire", no matter what is stored in Wikidata.
{{Infobox book/Wikidata/Sandbox | fetchwikidata = ALL | genre = Novel }}
The genre field is set to display "Novel", no matter what is stored in Wikidata.
Don't fetch genre
{{Infobox book/Wikidata/Sandbox | suppressfields = | fetchwikidata = author; pub_date; pages; dewey; congress }}
The genre field will not be fetched from Wikidata. Only the author, publication date, number of pages, Dewey index, and Library of Congress catalogue number are imported. A local value for genre will display.
See also
- Module:Wikidata, handling Wikidata more basically
-- Module to implement use of a blacklist and whitelist for infobox fields
-- Can take a named parameter |qid which is the Wikidata ID for the article
-- if not supplied, it will use the Wikidata ID associated with the current page.
-- Fields in blacklist are never to be displayed, i.e. module must return nil in all circumstances
-- Fields in whitelist return local value if it exists or the Wikidata value otherwise
-- The name of the field that this function is called from is passed in named parameter |name
-- The name is compulsory when blacklist or whitelist is used,
-- so the module returns nil if it is not supplied.
-- blacklist is passed in named parameter |suppressfields (or |spf)
-- whitelist is passed in named parameter |fetchwikidata (or |fwd)
local p = {}
local cdate = require("Module:Complex date")._complex_date
-- [[Module:Complex date]] has the following dependencies:
-- Module:I18n/complex date, Module:ISOdate, Module:DateI18n (alternative for Module:Date),
-- Module:Formatnum, Module:I18n/date, Module:Yesno, Module:Linguistic, Module:Calendar
-- The following, taken from https://www.mediawiki.org/wiki/Wikibase/DataModel#Dates_and_times,
-- is needed to use Module:Complex date which seemingly requires date precision as a string.
-- It would work better if only the authors of the mediawiki page could spell 'millennium'.
local dp = {
[6] = "millennium",
[7] = "century",
[8] = "decade",
[9] = "year",
[10] = "month",
[11] = "day",
}
local i18n =
{
["errors"] =
{
["property-not-found"] = "Property not found.",
["No property supplied"] = "No property supplied",
["entity-not-found"] = "Wikidata entity not found.",
["unknown-claim-type"] = "Unknown claim type.",
["unknown-entity-type"] = "Unknown entity type.",
["qualifier-not-found"] = "Qualifier not found.",
["site-not-found"] = "Wikimedia project not found.",
["labels-not-found"] = "No labels found.",
["descriptions-not-found"] = "No descriptions found.",
["aliases-not-found"] = "No aliases found.",
["unknown-datetime-format"] = "Unknown datetime format.",
["local-article-not-found"] = "Article is available on Wikidata, but not on Wikipedia",
["dab-page"] = " (dab)",
},
["months"] =
{
"January", "February", "March", "April", "May", "June",
"July", "August", "September", "October", "November", "December"
},
["century"] = "century",
["BC"] = "BC",
["BCE"] = "BCE",
["ordinal"] =
{
[1] = "st",
[2] = "nd",
[3] = "rd",
["default"] = "th"
},
["filespace"] = "File",
["Unknown"] = "Unknown",
["NaN"] = "Not a number",
-- set the following to the name of a tracking category,
-- e.g. "[[Category:Articles with missing Wikidata information]]", or "" to disable:
["missinginfocat"] = "[[Category:Articles with missing Wikidata information]]",
["editonwikidata"] = "Edit this on Wikidata",
["latestdatequalifier"] = function (date) return "before " .. date end,
-- some languages, e.g. Bosnian use a period as a suffix after each number in a date
["datenumbersuffix"] = "",
["list separator"] = ", ",
["multipliers"] = {
[0] = "",
[3] = " thousand",
[6] = " million",
[9] = " billion",
[12] = " trillion",
}
}
-- This allows a internationisation module to override the above table
if 'en' ~= mw.getContentLanguage():getCode() then
require("Module:i18n").loadI18n("Module:WikidataIB/i18n", i18n)
end
-- This piece of html implements a collapsible container. Check the classes exist on your wiki.
local collapsediv = '<div class="mw-collapsible mw-collapsed" style="width:100%; overflow:auto;" data-expandtext="{{int:show}}" data-collapsetext="{{int:hide}}">'
-- Some items should not be linked.
-- Each wiki can create a list of those in Module:WikidataIB/nolinks
-- It should return a table called itemsindex, containing true for each item not to be linked
local donotlink = {}
local nolinks_exists, nolinks = pcall(mw.loadData, "Module:WikidataIB/nolinks")
if nolinks_exists then
donotlink = nolinks.itemsindex
end
-------------------------------------------------------------------------------
-- Private functions
-------------------------------------------------------------------------------
--
-------------------------------------------------------------------------------
-- makeOrdinal needs to be internationalised along with the above:
-- takes cardinal numer as a numeric and returns the ordinal as a string
-- we need three exceptions in English for 1st, 2nd, 3rd, 21st, .. 31st, etc.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local makeOrdinal = function(cardinal)
local ordsuffix = i18n.ordinal.default
if cardinal % 10 == 1 then
ordsuffix = i18n.ordinal[1]
elseif cardinal % 10 == 2 then
ordsuffix = i18n.ordinal[2]
elseif cardinal % 10 == 3 then
ordsuffix = i18n.ordinal[3]
end
-- In English, 1, 21, 31, etc. use 'st', but 11, 111, etc. use 'th'
-- similarly for 12 and 13, etc.
if (cardinal % 100 == 11) or (cardinal % 100 == 12) or (cardinal % 100 == 13) then
ordsuffix = i18n.ordinal.default
end
return tostring(cardinal) .. ordsuffix
end
-------------------------------------------------------------------------------
-- findLang takes a "langcode" parameter if if supplied and valid
-- otherwise it tries to create it from the user's set language ({{int:lang}})
-- failing that it uses the wiki's content language.
-- It returns a language object
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local findLang = function(langcode)
local langobj
langcode = mw.text.trim(langcode or "")
if mw.language.isKnownLanguageTag(langcode) then
langobj = mw.language.new( langcode )
else
langcode = mw.getCurrentFrame():preprocess( '{{int:lang}}' )
if mw.language.isKnownLanguageTag(langcode) then
langobj = mw.language.new( langcode )
else
langobj = mw.language.getContentLanguage()
end
end
return langobj
end
-------------------------------------------------------------------------------
-- roundto takes a number (x)
-- and returns it rounded to (sf) significant figures
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local roundto = function(x, sf)
if x == 0 then return 0 end
local s = 1
if x < 0 then
x = -x
s = -1
end
if sf < 1 then sf = 1 end
local p = 10 ^ (math.floor(math.log10(x)) - sf + 1)
x = math.floor(x / p + 0.5) * p * s
-- if it's integral, cast to an integer:
if x == math.floor(x) then x = math.floor(x) end
return x
end
-------------------------------------------------------------------------------
-- decimalToDMS takes a decimal degrees (x) with precision (p)
-- and returns degrees/minutes/seconds according to the precision
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local decimalToDMS = function(x, p)
-- if p is not supplied, use a precision around 0.1 seconds
if not tonumber(p) then p = 1e-4 end
local d = math.floor(x)
local ms = (x - d) * 60
if p > 0.5 then -- precision is > 1/2 a degree
if ms > 30 then d = d + 1 end
ms = 0
end
local m = math.floor(ms)
local s = (ms - m) * 60
if p > 0.008 then -- precision is > 1/2 a minute
if s > 30 then m = m +1 end
s = 0
elseif p > 0.00014 then -- precision is > 1/2 a second
s = math.floor(s + 0.5)
elseif p > 0.000014 then -- precision is > 1/20 second
s = math.floor(10 * s + 0.5) / 10
elseif p > 0.0000014 then -- precision is > 1/200 second
s = math.floor(100 * s + 0.5) / 100
else -- cap it at 3 dec places for now
s = math.floor(1000 * s + 0.5) / 1000
end
return d, m, s
end
-------------------------------------------------------------------------------
-- decimalPrecision takes a decimal (x) with precision (p)
-- and returns x rounded approximately to the given precision
-- precision should be between 1 and 1e-6, preferably a power of 10.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local decimalPrecision = function(x, p)
local s = 1
if x < 0 then
x = -x
s = -1
end
-- if p is not supplied, pick an arbitrary precision
if not tonumber(p) then p = 1e-4
elseif p > 1 then p = 1
elseif p < 1e-6 then p = 1e-6
else p = 10 ^ math.floor(math.log10(p))
end
x = math.floor(x / p + 0.5) * p * s
-- if it's integral, cast to an integer:
if x == math.floor(x) then x = math.floor(x) end
-- if it's less than 1e-4, it will be in exponent form, so return a string with 6dp
-- 9e-5 becomes 0.000090
if math.abs(x) < 1e-4 then x = string.format("%f", x) end
return x
end
-------------------------------------------------------------------------------
-- formatDate takes a datetime of the usual format from mw.wikibase.entity:formatPropertyValues
-- like "1 August 30 BCE" as parameter 1
-- and formats it according to the df (date format) and bc parameters
-- df = ["dmy" / "mdy" / "y"] default will be "dmy"
-- bc = ["BC" / "BCE"] default will be "BCE"
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local format_Date = function(datetime, dateformat, bc)
local datetime = datetime or "1 August 30 BCE" -- in case of nil value
-- chop off multiple vales and/or any hours, mins, etc.
-- keep anything before punctuation - we just want a single date:
local dateval = string.match( datetime, "[%w ]+")
local dateformat = string.lower(dateformat or "dmy") -- default to dmy
local bc = string.upper(bc or "") -- can't use nil for bc
-- we only want to accept two possibilities: BC or default to BCE
if bc == "BC" then
bc = " " .. i18n["BC"] -- prepend a non-breaking space.
else
bc = " " .. i18n["BCE"]
end
local postchrist = true -- start by assuming no BCE
local dateparts = {}
for word in string.gmatch(dateval, "%w+") do
if word == "BCE" or word == "BC" then -- *** internationalise later ***
postchrist = false
else
-- we'll keep the parts that are not 'BCE' in a table
dateparts[#dateparts + 1] = word
end
end
if postchrist then bc = "" end -- set AD dates to no suffix *** internationalise later ***
local sep = " " -- separator is nbsp
local fdate = table.concat(dateparts, sep) -- set formatted date to same order as input
-- if we have day month year, check dateformat
if #dateparts == 3 then
if dateformat == "y" then
fdate = dateparts[3]
elseif dateformat == "mdy" then
fdate = dateparts[2] .. sep .. dateparts[1] .. "," .. sep .. dateparts[3]
end
elseif #dateparts == 2 and dateformat == "y" then
fdate = dateparts[2]
end
return fdate .. bc
end
-------------------------------------------------------------------------------
-- dateFormat is the handler for properties that are of type "time"
-- It takes timestamp, precision (6 to 11 per mediawiki), dateformat (y/dmy/mdy), BC format (BC/BCE),
-- a plaindate switch (yes/no/adj) to en/disable "sourcing cirumstances"/use adjectival form,
-- any qualifiers for the property, the language, and any adjective to use like 'before'.
-- It passes the date through the "complex date" function
-- and returns a string with the internatonalised date formatted according to preferences.
-------------------------------------------------------------------------------
-- Dependencies: findLang(); cdate(); dp[]
-------------------------------------------------------------------------------
local dateFormat = function(timestamp, dprec, df, bcf, pd, qualifiers, lang, adj)
-- A year can be stored like this: "+1872-00-00T00:00:00Z",
-- which is processed here as if it were the day before "+1872-01-01T00:00:00Z",
-- and that's the last day of 1871, so the year is wrong.
-- So fix the month 0, day 0 timestamp to become 1 January instead:
timestamp = timestamp:gsub("%-00%-00T", "-01-01T")
-- output formatting according to preferences (y/dmy/mdy)
df = (df or ""):lower()
-- just in case date precision is missing
dprec = dprec or 11
-- override more precise dates if required dateformat is year alone:
if df == "y" and dprec > 9 then dprec = 9 end
-- complex date only deals with precisions from 6 to 11, so clip range
dprec = dprec>11 and 11 or dprec
dprec = dprec<6 and 6 or dprec
-- BC format is "BC" or "BCE"
bcf = (bcf or ""):upper()
-- plaindate only needs the first letter (y/n/a)
pd = (pd or ""):sub(1,1):lower()
if pd == "" or pd == "n" or pd == "f" or pd == "0" then pd = false end
-- in case language isn't passed
lang = lang or findLang().code
-- set adj as empty if nil
adj = adj or ""
-- extract the day, month, year from the timestamp
local bc = timestamp:sub(1, 1)=="-" and "BC" or ""
local year, month, day = timestamp:match("[+-](%d*)-(%d*)-(%d*)T")
local iso = tonumber(year) -- if year is missing, let it throw an error
-- this will adjust the date format to be compatible with cdate
-- possible formats are Y, YY, YYY0, YYYY, YYYY-MM, YYYY-MM-DD
if dprec == 6 then iso = math.floor( (iso - 1) / 1000 ) + 1 end
if dprec == 7 then iso = math.floor( (iso - 1) / 100 ) + 1 end
if dprec == 8 then iso = math.floor( iso / 10 ) .. "0" end
if dprec == 10 then iso = year .. "-" .. month end
if dprec == 11 then iso = year .. "-" .. month .. "-" .. day end
-- add "circa" (Q5727902) from "sourcing circumstances" (P1480)
local sc = not pd and qualifiers and qualifiers.P1480
if sc then
for k1, v1 in pairs(sc) do
if v1.datavalue and v1.datavalue.value.id == "Q5727902" then
adj = "circa"
break
end
end
end
local fdate = cdate("", adj, tostring(iso), dp[dprec], bc, "", "", "", "", lang, 1)
-- this may have QuickStatements info appended to it in a div, so remove that
fdate = fdate:gsub(' <div style="display: none;">[^<]*</div>', '')
-- it may also be returned wrapped in a microformat, so remove that
fdate = fdate:gsub("<[^>]*>", "")
-- if 'circa', use the abbreviated form *** internationalise later ***
fdate = fdate:gsub('circa ', '<abbr title="circa">c.</abbr> ')
-- deal with BC/BCE
if bcf == "BCE" then
fdate = fdate:gsub('BC', 'BCE')
end
-- deal with mdy format
if df == "mdy" then
fdate = fdate:gsub("(%d+) (%w+) (%d+)", "%2 %1, %3")
end
-- deal with adjectival form *** internationalise later ***
if pd == "a" then
fdate = fdate:gsub(' century', '-century')
end
return fdate
end
-------------------------------------------------------------------------------
-- parseParam takes a (string) parameter, e.g. from the list of frame arguments,
-- and makes "false", "no", and "0" into the (boolean) false
-- it makes the empty string and nil into the (boolean) value passed as default
-- allowing the parameter to be true or false by default.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local parseParam = function(param, default)
if param and param ~= "" then
param = param:lower()
if (param == "false") or (param:sub(1,1) == "n") or (param == "0") then
return false
else
return true
end
else
return default
end
end
-------------------------------------------------------------------------------
-- _getSitelink takes the qid of a Wikidata entity passed as |qid=
-- It takes an optional parameter |wiki= to determine which wiki is to be checked for a sitelink
-- If the parameter is blank, then it uses the local wiki.
-- If there is a sitelink to an article available, it returns the plain text link to the article
-- If there is no sitelink, it returns nil.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local _getSitelink = function(qid, wiki)
qid = (qid or ""):upper()
if qid == "" then return nil end
wiki = wiki or ""
local sitelink
if wiki == "" then
sitelink = mw.wikibase.sitelink(qid)
else
sitelink = mw.wikibase.sitelink(qid, wiki)
end
return sitelink
end
-------------------------------------------------------------------------------
-- _getCommonslink takes an optional qid of a Wikidata entity passed as |qid=
-- It returns one of the following in order of preference:
-- the Commons sitelink of the linked Wikidata item;
-- the Commons sitelink of the topic's main category of the linked Wikidata item;
-- the Commons category.
-- If the optional parameter onlycat is true/yes/1 then only categories are returned
-- defaults to false.
-------------------------------------------------------------------------------
-- Dependencies: _getSitelink(); parseParam()
-------------------------------------------------------------------------------
local _getCommonslink = function(qid, onlycat, fallback)
qid = (qid or ""):upper()
if qid == "" then qid = mw.wikibase.getEntityIdForCurrentPage() end
if not qid then return nil end
onlycat = parseParam(onlycat, false)
local sitelink = _getSitelink(qid, "commonswiki")
if onlycat and sitelink and sitelink:sub(1,9) ~= "Category:" then sitelink = nil end
if not sitelink then
-- check for topic's main category
local prop910 = mw.wikibase.getBestStatements(qid, "P910")[1]
if prop910 then
local tmcid = prop910.mainsnak.datavalue.value.id
sitelink = _getSitelink(tmcid, "commonswiki")
end
end
if not sitelink and fallback then
-- check for Commons category (string value)
local prop373 = mw.wikibase.getBestStatements(qid, "P373")[1]
if prop373 then
sitelink = prop373.mainsnak.datavalue.value
if sitelink then sitelink = "Category:" .. sitelink end
end
end
return sitelink
end
-------------------------------------------------------------------------------
-- The label in a Wikidata item is subject to vulnerabilities
-- that an attacker might try to exploit.
-- It needs to be 'sanitised' by removing any wikitext before use.
-- If it doesn't exist, return the id for the item
-- a second (boolean) value is also returned, value is true when the label exists
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local labelOrId = function(id)
local label = mw.wikibase.label(id)
if label then
return mw.text.nowiki(label), true
else
return id, false
end
end
-------------------------------------------------------------------------------
-- linkedItem takes an entity-id and returns a string, linked if possible.
-- This is the handler for "wikibase-item". Preferences:
-- 1. Display linked disambiguated sitelink if it exists
-- 2. Display linked label if it is a redirect
-- 3. TBA: Display an inter-language link for the label if it exists other than in default language
-- 4. Display unlinked label if it exists
-- 5. Display entity-id for now to indicate a label could be provided
-------------------------------------------------------------------------------
-- Dependencies: labelOrId()
-------------------------------------------------------------------------------
local linkedItem = function(id, lprefix, lpostfix, prefix, postfix, dtxt)
lprefix = lprefix or "" -- toughen against nil values passed
lpostfix = lpostfix or ""
prefix = prefix or ""
postfix = postfix or ""
local disp
local sitelink = mw.wikibase.sitelink(id)
local label, islabel
if dtxt then
label, islabel = dtxt, true
else
label, islabel = labelOrId(id)
end
if mw.site.siteName ~= "Wikimedia Commons" then
if sitelink then
if not dtxt then
-- strip any namespace or dab from the sitelink and use that as label
local pos = sitelink:find(":") or 0
label = sitelink:sub(pos+1):gsub("%s%(.+%)$", ""):gsub(",.+$", "")
end
if donotlink[label] then
disp = prefix .. label .. postfix
else
disp = "[[" .. lprefix .. sitelink .. lpostfix .. "|" .. prefix .. label .. postfix .. "]]"
end
elseif islabel then
-- no sitelink, label exists, so check if a redirect with that title exists
local artitle = mw.title.new(label, 0)
if artitle and artitle.redirectTarget and not donotlink[label] then
-- there's a redirect with the same title as the label, so let's link to that
disp = "[[".. lprefix .. label .. lpostfix .. "|" .. prefix .. label .. postfix .. "]]"
else
-- no sitelink, label exists, not redirect (or donotlink) so output plain label
disp = prefix .. label .. postfix
end -- test if article title exists as redirect on current Wiki
else
-- no sitelink and no label, so return whatever was returned from labelOrId for now
-- add tracking category [[Category:Articles with missing Wikidata information]]
disp = prefix .. label .. postfix .. i18n.missinginfocat
end
else
local ccat = mw.wikibase.getBestStatements(id, "P373")[1]
if ccat then
ccat = ccat.mainsnak.datavalue.value
disp = "[[" .. lprefix .. "Category:" .. ccat .. lpostfix .. "|" .. prefix .. label .. postfix .. "]]"
elseif sitelink then
-- this asumes that if a sitelink exists, then a label also exists
disp = "[[" .. lprefix .. sitelink .. lpostfix .. "|" .. prefix .. label .. postfix .. "]]"
else
-- no sitelink and no Commons cat, so return label from labelOrId for now
disp = prefix .. label .. postfix
end
end
return disp
end
-------------------------------------------------------------------------------
-- sourced takes a table representing a statement that may or may not have references
-- it counts how many references are sourced to something not containing the word "wikipedia"
-- it returns a boolean = true if there are any sourced references.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local sourced = function(claim)
if claim.references then
for kr, vr in pairs(claim.references) do
local ref = mw.wikibase.renderSnaks(vr.snaks)
if not ref:find("Wikipedia") then
return true
end
end
end
end
-------------------------------------------------------------------------------
-- setRanks takes a flag (parameter passed) that requests the values to return
-- "b[est]" returns preferred if available, otherwise normal
-- "p[referred]" returns preferred
-- "n[ormal]" returns normal
-- "d[eprecated]" returns deprecated
-- multiple values are allowed, e.g. "preferred normal" (which is the default)
-- "best" will override the other flags, and set p and n
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local setRanks = function(rank)
rank = (rank or ""):lower()
-- if nothing passed, return preferred and normal
-- if rank == "" then rank = "p n" end
local ranks = {}
for w in string.gmatch(rank, "%a+") do
w = w:sub(1,1)
if w == "b" or w == "p" or w == "n" or w == "d" then
ranks[w] = true
end
end
-- check if "best" is requested or no ranks requested; and if so, set preferred and normal
if ranks.b or not next(ranks) then
ranks.p = true
ranks.n = true
end
return ranks
end
-------------------------------------------------------------------------------
-- parseInput processes the Q-id , the blacklist and the whitelist
-- if an input parameter is supplied, it returns that and ends the call.
-- it returns (1) either the qid or nil indicating whether or not the call should continue
-- and (2) a table containing all of the statements for the propertyID and relevant Qid
-- if "best" ranks are requested, it returns those instead of all non-deprecated ranks
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
local parseInput = function(frame, input_parm, property_id)
-- There may be a local parameter supplied, if it's blank, set it to nil
input_parm = mw.text.trim(input_parm or "")
if input_parm == "" then input_parm = nil end
local args = frame.args
-- can take a named parameter |qid which is the Wikidata ID for the article.
-- if it's not supplied, use the id for the current page
local qid = args.qid or ""
if qid == "" then qid = mw.wikibase.getEntityIdForCurrentPage() end
-- if there's no Wikidata item for the current page return nil
if not qid then return false, input_parm end
-- The blacklist is passed in named parameter |suppressfields
local blacklist = args.suppressfields or args.spf
-- The whitelist is passed in named parameter |fetchwikidata
local whitelist = args.fetchwikidata or args.fwd
if not whitelist or whitelist == "" then whitelist = "NONE" end
-- The name of the field that this function is called from is passed in named parameter |name
local fieldname = args.name or ""
if blacklist then
-- The name is compulsory when blacklist is used, so return nil if it is not supplied
if not fieldname or fieldname == "" then return false, nil end
-- If this field is on the blacklist, then return nil
if blacklist:find(fieldname) then return false, nil end
end
-- If we got this far then we're not on the blacklist
-- The blacklist overrides any locally supplied parameter as well
-- If a non-blank input parameter was supplied return it
if input_parm then return false, input_parm end
-- We can filter out non-valid properties
if property_id:sub(1,1):upper() ~="P" or property_id == "P0" then return false, nil end
-- Otherwise see if this field is on the whitelist:
-- needs a bit more logic because find will return its second value = 0 if fieldname is ""
-- but nil if fieldname not found on whitelist
local _, found = whitelist:find(fieldname)
found = ((found or 0) > 0)
if whitelist ~= 'ALL' and (whitelist:upper() == "NONE" or not found) then
return false, nil
end
-- See what's on Wikidata (the call always returns a table, but it may be empty):
local props = {}
if args.reqranks.b then
props = mw.wikibase.getBestStatements(qid, property_id)
else
props = mw.wikibase.getAllStatements(qid, property_id)
end
if props[1] then
return qid, props
end
-- no property on Wikidata
return false, nil
end
-------------------------------------------------------------------------------
-- createicon assembles the "Edit at Wikidata" pen icon.
-- It returns a wikitext string.
-------------------------------------------------------------------------------
-- Dependencies: i18n[];
-------------------------------------------------------------------------------
local createicon = function(langcode, entityID, propertyID)
local icon = " [[" .. i18n["filespace"]
icon = icon .. ":Blue pencil.svg |frameless |text-top |10px |alt="
icon = icon .. i18n["editonwikidata"]
icon = icon .. "|link=https://www.wikidata.org/wiki/" .. entityID
icon = icon .. "?uselang=" .. langcode
if propertyID then icon = icon .. "#" .. propertyID end
icon = icon .. "|" .. i18n["editonwikidata"] .. "]]"
return icon
end
-------------------------------------------------------------------------------
-- assembleoutput takes the sequence table containing the property values
-- and formats it according to switches given. It returns a string or nil.
-- It needs the entityID and propertyID to create a link in the pen icon.
-------------------------------------------------------------------------------
-- Dependencies: parseParam();
-------------------------------------------------------------------------------
local assembleoutput = function(out, args, entityID, propertyID)
-- sorted is a boolean passed to enable sorting of the values returned
-- if nothing or an empty string is passed set it false
-- if "false" or "no" or "0" is passed set it false
local sorted = parseParam(args.sorted, false)
-- noicon is a boolean passed to suppress the trailing "edit at Wikidata" icon
-- for use when the value is processed further by the infobox
-- if nothing or an empty string is passed set it false
-- if "false" or "no" or "0" is passed set it false
local noic = parseParam(args.noicon, false)
-- list is the name of a template that a list of multiple values is passed through
-- examples include "hlist" and "ubl"
-- setting it to "prose" produces something like "1, 2, 3, and 4"
local list = args.list or ""
-- sep is a string that is used to separate multiple returned values
-- if nothing or an empty string is passed set it to the default
-- any double-quotes " are stripped out, so that spaces may be passed
-- e.g. |sep=" - "
local sepdefault = i18n["list separator"]
local separator = args.sep or ""
separator = string.gsub(separator, '"', '')
if separator == "" then
separator = sepdefault
end
-- collapse is a number that determines the maximum number of returned values
-- before the output is collapsed.
-- Zero or not a number result in no collapsing (default becomes 0).
local collapse = tonumber(args.collapse) or 0
-- if there's anything to return, then return a list
-- comma-separated by default, but may be specified by the sep parameter
-- optionally specify a hlist or ubl or a prose list, etc.
local strout
if #out > 0 then
if sorted then table.sort(out) end
-- if a pen icon is wanted add it the end of the last value
if not noic then
out[#out] = out[#out] .. createicon(args.langobj.code, entityID, propertyID)
end
if list == "" then
strout = table.concat(out, separator)
elseif list:lower() == "prose" then
strout = mw.text.listToText( out )
else
strout = mw.getCurrentFrame():expandTemplate{title = list, args = out}
end
if collapse >0 and #out > collapse then
strout = collapsediv .. strout .. "</div>"
end
else
strout = nil -- no items had valid reference
end
return strout
end
-------------------------------------------------------------------------------
-- rendersnak takes a table (propval) containing the information stored on one property value
-- and returns the value as a string and its language if monolingual text.
-- It handles data of type:
-- wikibase-item
-- time
-- string, url, commonsMedia, external-id
-- quantity
-- globe-coordinate
-- monolingualtext
-- It also requires linked, the link/pre/postfixes, uabbr, and the arguments passed from frame.
-- The optional filter parameter allows quantities to be be filtered by unit Qid.
-------------------------------------------------------------------------------
-- Dependencies: parseParam(); labelOrId(); i18n[]; dateFormat();
-- roundto(); decimalPrecision(); decimalToDMS(); linkedItem();
-------------------------------------------------------------------------------
local rendersnak = function(propval, args, linked, lpre, lpost, pre, post, uabbr, filter)
lpre = lpre or ""
lpost = lpost or ""
pre = pre or ""
post = post or ""
local dtxt = args.displaytext or args.dt
if dtxt == "" then dtxt = nil end
local snak = propval.mainsnak or propval
local dv = snak.datavalue
local dtype = propval.datatype or propval.mainsnak.datatype
dv = dv and dv.value
-- value and monolingual text language code returned
local val, mlt
if propval.rank and not args.reqranks[propval.rank:sub(1, 1)] then
-- val is nil: value has a rank that isn't requested
------------------------------------
elseif snak.snaktype == "somevalue" then -- value is unknown
val = i18n["Unknown"]
------------------------------------
elseif snak.snaktype == "novalue" then -- value is none
-- val = "No value" -- don't return anything
------------------------------------
elseif dtype == "wikibase-item" then -- data type is a wikibase item:
-- it's wiki-linked value, so output as link if enabled and possible
local qnumber = dv.id
if linked then
val = linkedItem(qnumber, lpre, lpost, pre, post, dtxt)
else -- no link wanted so check for display-text, otherwise test for lang code
local label, islabel
if dtxt then
label = dtxt
else
label, islabel = labelOrId(qnumber)
local langlabel = mw.wikibase.getLabelByLang(qnumber, args.lang)
if langlabel then
label = mw.text.nowiki( langlabel )
end
end
val = pre .. label .. post
end -- test for link required
------------------------------------
elseif dtype == "time" then -- data type is time:
-- time is in timestamp format
-- date precision is integer per mediawiki
-- output formatting according to preferences (y/dmy/mdy)
-- BC format as BC or BCE
-- plaindate is passed to disable looking for "sourcing cirumstances"
-- or to set the adjectival form
-- qualifiers (if any) is a nested table or nil
-- lang is given, or user language, or site language
val = dateFormat(dv.time, dv.precision, args.df, args.bc, args.pd, propval.qualifiers, args.lang)
------------------------------------
-- data types which are strings:
elseif dtype == "commonsMedia" or dtype == "external-id" or dtype == "string" or dtype == "url" then
-- commonsMedia or external-id or string or url
-- all have mainsnak.datavalue.value as string
if (lpre == "" or lpre == ":") and lpost == "" then
-- don't link if no linkpre/postfix or linkprefix is just ":"
val = pre .. dv .. post
else
val = "[[" .. lpre .. dv .. lpost .. "|" .. pre .. dv .. post .. "]]"
end -- check for link requested (i.e. either linkprefix or linkpostfix exists)
------------------------------------
-- data types which are quantities:
elseif dtype == "quantity" then
-- quantities have mainsnak.datavalue.value.amount and mainsnak.datavalue.value.unit
-- the unit is of the form http://www.wikidata.org/entity/Q829073
--
-- implement a switch to turn on/off numerical formatting later
local fnum = true
--
-- a switch to turn on/off conversions - only for en-wiki
local conv = parseParam(args.conv or args.convert, false)
-- if we have conversions, we won't have formatted numbers or scales
if conv then
fnum = false
args.scale = "0"
end
--
-- a switch to turn on/off showing units, default is true
local showunits = parseParam(args.su or args.showunits, true)
--
-- convert amount to a number
local amount = tonumber(dv.amount) or i18n["NaN"]
--
-- scale factor for millions, billions, etc.
local sc = tostring(args.scale or ""):sub(1,1):lower()
local scale
if sc == "a" then
-- automatic scaling
if amount > 1e15 then
scale = 12
elseif amount > 1e12 then
scale = 9
elseif amount > 1e9 then
scale = 6
elseif amount > 1e6 then
scale = 3
else
scale = 0
end
else
scale = tonumber(args.scale) or 0
if scale < 0 or scale > 12 then scale = 0 end
scale = math.floor(scale/3) * 3
end
local factor = 10^scale
amount = amount / factor
-- ranges:
local range = ""
-- check if upper and/or lower bounds are given and significant
local upb = tonumber(dv.upperBound)
local lowb = tonumber(dv.lowerBound)
if upb and lowb then
-- differences rounded to 2 sig fig:
local posdif = roundto(upb - amount, 2) / factor
local negdif = roundto(amount - lowb, 2) / factor
upb, lowb = amount + posdif, amount - negdif
-- round scaled numbers to integers or 4 sig fig
if (scale > 0 or sc == "a") then
if amount < 1e4 then
amount = roundto(amount, 4)
else
amount = math.floor(amount + 0.5)
end
end
if fnum then amount = args.langobj:formatNum( amount ) end
if posdif ~= negdif then
-- non-symmetrical
range = " +" .. posdif .. " -" .. negdif
elseif posdif ~= 0 then
-- symmetrical and non-zero
range = " ±" .. posdif
else
-- otherwise range is zero, so leave it as ""
end
else
-- round scaled numbers to integers or 4 sig fig
if (scale > 0 or sc == "a") then
if amount < 1e4 then
amount = roundto(amount, 4)
else
amount = math.floor(amount + 0.5)
end
end
if fnum then amount = args.langobj:formatNum( amount ) end
end
-- unit names and symbols:
-- extract the qid in the form 'Qnnn' from the value.unit url
-- and then fetch the label from that - or symbol if unitabbr is true
local unit = ""
local usep = ""
local usym = ""
local unitqid = string.match( dv.unit, "(Q%d+)" )
if filter and unitqid ~= filter then return nil end
if unitqid and showunits then
local uname = mw.wikibase.getLabelByLang(unitqid, args.lang) or ""
if uname ~= "" then usep, unit = " ", uname end
if uabbr then
-- see if there's a unit symbol (P5061)
local unitsymbols = mw.wikibase.getAllStatements(unitqid, "P5061")
-- construct fallback table
local fbtbl = mw.language.getFallbacksFor( args.lang )
table.insert( fbtbl, 1, args.lang )
local found = false
for idx1, us in ipairs(unitsymbols) do
for idx2, fblang in ipairs(fbtbl) do
if us.mainsnak.datavalue.value.language == fblang then
usym = us.mainsnak.datavalue.value.text
found = true
break
end
if found then break end
end -- loop through fallback table
end -- loop through values of P5061
if found then usep, unit = " ", usym end
end
end
-- format display:
if conv and usym ~= "" then
if range == "" then
val = mw.getCurrentFrame():expandTemplate{title = "cvt", args = {amount, usym}}
else
val = mw.getCurrentFrame():expandTemplate{title = "cvt", args = {lowb, "to", upb, usym}}
end
elseif unit == "$" or unit == "£" then
val = unit .. amount .. range .. i18n.multipliers[scale]
else
val = amount .. range .. i18n.multipliers[scale] .. usep .. unit
end
------------------------------------
-- datatypes which are global coordinates:
elseif dtype == "globe-coordinate" then
-- 'display' parameter defaults to "inline, title" *** unused for now ***
-- local disp = args.display or ""
-- if disp == "" then disp = "inline, title" end
--
-- format parameter switches from deg/min/sec to decimal degrees
-- default is deg/min/sec -- decimal degrees needs |format = dec
local form = (args.format or ""):lower():sub(1,3)
if form ~= "dec" then form = "dms" end
--
-- show parameter allows just the latitude or longitude to be shown
local show = (args.show or ""):lower()
if show ~= "longlat" then show = show:sub(1,3) end
--
local lat, long, prec = dv.latitude, dv.longitude, dv.precision
if show == "lat" then
val = decimalPrecision(lat, prec)
elseif show == "lon" then
val = decimalPrecision(long, prec)
elseif show == "longlat" then
val = decimalPrecision(long, prec) .. ", " .. decimalPrecision(lat, prec)
else
local ns = "N"
local ew = "E"
if lat < 0 then
ns = "S"
lat = - lat
end
if long < 0 then
ew = "W"
long = - long
end
if form == "dec" then
lat = decimalPrecision(lat, prec)
long = decimalPrecision(long, prec)
val = lat .. "°" .. ns .. " " .. long .. "°" .. ew
else
local latdeg, latmin, latsec = decimalToDMS(lat, prec)
local longdeg, longmin, longsec = decimalToDMS(long, prec)
if latsec == 0 and longsec == 0 then
if latmin == 0 and longmin == 0 then
val = latdeg .. "°" .. ns .. " " .. longdeg .. "°" .. ew
else
val = latdeg .. "°" .. latmin .. "′" .. ns .. " "
val = val .. longdeg .. "°".. longmin .. "′" .. ew
end
else
val = latdeg .. "°" .. latmin .. "′" .. latsec .. "″" .. ns .. " "
val = val .. longdeg .. "°" .. longmin .. "′" .. longsec .. "″" .. ew
end
end
end
------------------------------------
elseif dtype == "monolingualtext" then -- data type is Monolingual text:
-- has mainsnak.datavalue.value as a table containing language/text pairs
-- collect all the values in 'out' and languages in 'mlt' and process them later
val = pre .. dv.text .. post
mlt = dv.language
------------------------------------
else
-- some other data type so write a specific handler
val = "unknown data type: " .. dtype
end -- of datatype/unknown value/sourced check
return val, mlt
end
-------------------------------------------------------------------------------
-- propertyvalueandquals takes a property object, the arguments passed from frame,
-- and a qualifier propertyID.
-- It returns a sequence (table) of values representing the values of that property
-- and qualifiers that match the qualifierID if supplied.
-------------------------------------------------------------------------------
-- Dependencies: parseParam(); sourced(); labelOrId(); i18n.latestdatequalifier(); format_Date();
-- makeOrdinal(); roundto(); decimalPrecision(); decimalToDMS(); assembleoutput();
-------------------------------------------------------------------------------
local function propertyvalueandquals(objproperty, args, qualID)
-- needs this style of declaration because it's re-entrant
-- onlysourced is a boolean passed to return only values sourced to other than Wikipedia
-- if nothing or an empty string is passed set it true
local onlysrc = parseParam(args.onlysourced or args.osd, true)
-- linked is a a boolean that enables the link to a local page via sitelink
-- if nothing or an empty string is passed set it true
local linked = parseParam(args.linked, true)
-- prefix is a string that may be nil, empty (""), or a string of characters
-- this is prefixed to each value
-- useful when when multiple values are returned
-- any double-quotes " are stripped out, so that spaces may be passed
local prefix = (args.prefix or ""):gsub('"', '')
-- postfix is a string that may be nil, empty (""), or a string of characters
-- this is postfixed to each value
-- useful when when multiple values are returned
-- any double-quotes " are stripped out, so that spaces may be passed
local postfix = (args.postfix or ""):gsub('"', '')
-- linkprefix is a string that may be nil, empty (""), or a string of characters
-- this creates a link and is then prefixed to each value
-- useful when when multiple values are returned and indirect links are needed
-- any double-quotes " are stripped out, so that spaces may be passed
local lprefix = (args.linkprefix or args.lp or ""):gsub('"', '')
-- linkpostfix is a string that may be nil, empty (""), or a string of characters
-- this is postfixed to each value when linking is enabled with lprefix
-- useful when when multiple values are returned
-- any double-quotes " are stripped out, so that spaces may be passed
local lpostfix = (args.linkpostfix or ""):gsub('"', '')
-- wdlinks is a boolean passed to enable links to Wikidata when no article exists
-- if nothing or an empty string is passed set it false
local wdl = parseParam(args.wdlinks or args.wdl, false)
-- unitabbr is a boolean passed to enable unit abbreviations for common units
-- if nothing or an empty string is passed set it false
local uabbr = parseParam(args.unitabbr or args.uabbr, false)
-- qualsonly is a boolean passed to return just the qualifiers
-- if nothing or an empty string is passed set it false
local qualsonly = parseParam(args.qualsonly or args.qo, false)
-- maxvals is a string that may be nil, empty (""), or a number
-- this determines how many items may be returned when multiple values are available
-- setting it = 1 is useful where the returned string is used within another call, e.g. image
local maxvals = tonumber(args.maxvals) or 0
-- pd (plain date) is a string: yes/true/1 | no/false/0 | adj
-- to disable/enable "sourcing cirumstances" or use adjectival form for the plain date
local pd = args.plaindate or args.pd or "no"
args.pd = pd
local lang = args.lang
-- all proper values of a Wikidata property will be the same type as the first
-- qualifiers don't have a mainsnak, properties do
local datatype = objproperty[1].datatype or objproperty[1].mainsnak.datatype
-- out holds the values for this property
-- mlt holds the language code if the datatype is monolingual text
local out = {}
local mlt = {}
for k, v in ipairs(objproperty) do
local hasvalue = true
if (onlysrc and not sourced(v)) then
-- no value: it isn't sourced when onlysourced=true
hasvalue = false
elseif qualsonly and qualID then
-- no value: it isn't sourced when only qualifiers are requested
else
out[#out+1], mlt[#out+1] = rendersnak(v, args, linked, lprefix, lpostfix, prefix, postfix, uabbr)
end
-- See if qualifiers are to be returned:
local snak = v.mainsnak or v
if hasvalue and v.qualifiers and qualID and snak.snaktype=="value" then
local qsep = (args.qsep or ""):gsub('"', '')
local qargs = {
["osd"] = "false",
["linked"] = tostring(linked),
["prefix"] = args.qprefix,
["postfix"] = args.qpostfix,
["linkprefix"] = args.qlinkprefix or args.qlp,
["linkpostfix"] = args.qlinkpostfix,
["wdl"] = "false",
["unitabbr"] = tostring(uabbr),
["maxvals"] = 0,
["sorted"] = args.qsorted,
["noicon"] = "true",
["list"] = args.qlist,
["sep"] = qsep,
["langobj"] = args.langobj,
["lang"] = args.langobj.code,
}
local qlist = {}
local t1, t2 = "", ""
-- see if we want all qualifiers
if qualID == "ALL" then
if v["qualifiers-order"] then
-- the values in the order table are the keys for the qualifiers table:
for k1, v1 in ipairs(v["qualifiers-order"]) do
if v1 == "P1326" then
local ts = v.qualifiers[v1][1].datavalue.value.time
local dp = v.qualifiers[v1][1].datavalue.value.precision
qlist[#qlist + 1] = dateFormat(ts, dp, args.df, args.bc, pd, "", lang, "before")
else
qlist[#qlist + 1] = assembleoutput(propertyvalueandquals(v.qualifiers[v1], qargs), qargs)
end
end
else
local ql = propertyvalueandquals(v.qualifiers, qargs)
for k1, v1 in ipairs(ql) do
if k1 == "P1326" then
local ts = v1[1].datavalue.value.time
local dp = v1[1].datavalue.value.precision
qlist[#qlist + 1] = dateFormat(ts, dp, args.df, args.bc, pd, "", lang, "before")
else
qlist[#qlist + 1] = v1
end
end
end
-- see if we want date/range
elseif qualID == "DATES" then
qargs.maxvals = 1
for k1, v1 in pairs(v.qualifiers) do
if k1 == "P580" then -- P580 is "start time"
t1 = propertyvalueandquals(v1, qargs)[1] or ""
elseif k1 == "P582" then -- P582 is "end time"
t2 = propertyvalueandquals(v1, qargs)[1] or ""
end
end
-- otherwise process qualID as a list of qualifiers
else
for q in mw.text.gsplit(qualID, "%p") do -- split at punctuation and iterate
q = mw.text.trim(q):upper() -- remove whitespace and capitalise
if q == "P1326" then
-- latest date, so supply 'before' as well. Assume one date value.
for k1, v1 in pairs(v.qualifiers) do
if k1 == "P1326" then
local ts = v1[1].datavalue.value.time
local dp = v1[1].datavalue.value.precision
qlist[#qlist + 1] = dateFormat(ts, dp, args.df, args.bc, pd, "", lang, "before")
end
end
else
for k1, v1 in pairs(v.qualifiers) do
if k1 == q then
local ql = propertyvalueandquals(v1, qargs)
for k2, v2 in ipairs(ql) do
qlist[#qlist + 1] = v2
end
end
end
end
end -- of loop through list of qualifiers in qualID
end -- of testing for what qualID is
local t = t1 .. t2
-- *** internationalise date separators later ***
local dsep = "–"
if t:find("%s") or t:find(" ") then dsep = " – " end
if #qlist > 0 then
local qstr = assembleoutput(qlist, qargs)
if qualsonly then
out[#out+1] = qstr
else
out[#out] = out[#out] .. " (" .. qstr .. ")"
end
elseif t > "" then
if qualsonly then
out[#out+1] = t1 .. dsep .. t2
else
out[#out] = out[#out] .. " (" .. t1 .. dsep .. t2 .. ")"
end
end
end -- of test for qualifiers wanted
if maxvals > 0 and #out >= maxvals then break end
end -- of for each value loop
-- we need to pick one value to return if the datatype was "monolingualtext"
-- if there's only one value, use that
-- otherwise look through the fallback languages for a match
if datatype == "monolingualtext" and #out >1 then
local langcode = args.langobj.code
langcode = mw.text.split( langcode, '-', true )[1]
local fbtbl = mw.language.getFallbacksFor( langcode )
table.insert( fbtbl, 1, langcode )
local bestval = ""
local found = false
for idx1, lang1 in ipairs(fbtbl) do
for idx2, lang2 in ipairs(mlt) do
if (lang1 == lang2) and not found then
bestval = out[idx2]
found = true
break
end
end -- loop through values of property
end -- loop through fallback languages
if found then
-- replace output table with a table containing the best value
out = { bestval }
else
-- more than one value and none of them on the list of fallback languages
-- sod it, just give them the first one
out = { out[1] }
end
end
return out
end
-------------------------------------------------------------------------------
-- Common code for p.getValueByQual and p.getValueByLang
-------------------------------------------------------------------------------
-- Dependencies: parseParam; setRanks; parseInput; sourced; assembleoutput;
-------------------------------------------------------------------------------
local _getvaluebyqual = function(frame, qualID, checkvalue)
-- The property ID that will have a qualifier is the first unnamed parameter
local propertyID = mw.text.trim(frame.args[1] or "")
if propertyID == "" then return "no property supplied" end
if qualID == "" then return "no qualifier supplied" end
-- onlysourced is a boolean passed to return property values
-- only when property values are sourced to something other than Wikipedia
-- if nothing or an empty string is passed set it true
-- if "false" or "no" or 0 is passed set it false
local onlysrc = parseParam(frame.args.onlysourced or frame.args.osd, true)
-- set the requested ranks flags
frame.args.reqranks = setRanks(frame.args.rank)
-- set a language object and code in the frame.args table
frame.args.langobj = findLang(frame.args.lang)
frame.args.lang = frame.args.langobj.code
local args = frame.args
-- check for locally supplied parameter in second unnamed parameter
-- success means no local parameter and the property exists
local qid, props = parseInput(frame, args[2], propertyID)
local linked = parseParam(args.linked, true)
local lpre = (args.linkprefix or args.lp or ""):gsub('"', '')
local lpost = (args.linkpostfix or ""):gsub('"', '')
local pre = (args.prefix or ""):gsub('"', '')
local post = (args.postfix or ""):gsub('"', '')
local uabbr = parseParam(args.unitabbr or args.uabbr, false)
local filter = (args.unit or ""):upper()
if filter == "" then filter = nil end
if qid then
local out = {}
-- Scan through the values of the property
-- we want something like property is "pronunciation audio (P443)" in propertyID
-- with a qualifier like "language of work or name (P407)" in qualID
-- whose value has the required ID, like "British English (Q7979)", in qval
for k1, v1 in ipairs(props) do
if v1.mainsnak.snaktype == "value" then
-- check if it has the right qualifier
local v1q = v1.qualifiers
if v1q and v1q[qualID] then
if onlysrc == false or sourced(v1) then
-- if we've got this far, we have a (sourced) claim with qualifiers
-- so see if matches the required value
-- We'll only deal with wikibase-items for now
if v1q[qualID][1].datatype == "wikibase-item" then
if checkvalue(v1q[qualID][1].datavalue.value.id) then
out[#out + 1] = rendersnak(v1, args, linked, lpre, lpost, pre, post, uabbr, filter)
end
end
end -- of check for sourced
end -- of check for matching required value and has qualifiers
else
return nil
end -- of check for string
end -- of loop through values of propertyID
return assembleoutput(out, frame.args, qid, propertyID)
else
return props -- either local parameter or nothing
end -- of test for success
return nil
end
-------------------------------------------------------------------------------
-- _location takes Q-id and follows P131 (located in the administrative territorial entity)
-- or P276 (location) or P706 (located on terrain feature)
-- from the initial item to higher level territories/locations until it reaches the highest.
-- An optional boolean, 'first', determines whether the first item is returned (default: false).
-- An optional boolean 'skip' toggles the display to skip to the last item (default: false).
-- It returns a table containing the locations - linked where possible, except for the highest.
-------------------------------------------------------------------------------
-- Dependencies: findLang(); labelOrId(); linkedItem
-------------------------------------------------------------------------------
local _location = function(qid, first, skip)
first = parseParam(first, false)
skip = parseParam(skip, false)
local out = {}
local langcode = findLang():getCode()
local finished = false
local count = 0
repeat
local prop = mw.wikibase.getBestStatements(qid, "P131")[1] or mw.wikibase.getBestStatements(qid, "P276")[1] or mw.wikibase.getBestStatements(qid, "P706")[1]
-- check if it's an instance of (P31) a country (Q6256) and terminate the chain if it is
local inst = mw.wikibase.getAllStatements(qid, "P31")
if #inst > 0 then
for k, v in ipairs(inst) do
local instid = v.mainsnak.datavalue.value.id
-- stop if it's a country (or a country within the United Kingdom if skip is true)
if instid == "Q6256" or (skip and instid == "Q3336843") then
prop = nil -- this will ensure this is treated as top-level location
break
end
end
end
if prop and prop.mainsnak.datavalue then
if not skip or count == 0 then
out[#out+1] = linkedItem(qid, ":", "", "", "") -- get a linked value if we can
end
qid = prop.mainsnak.datavalue.value.id
else
-- This is top-level location, so get short name except when this is the first item
-- Use full label if there's no short name or this is the first item
local prop1813 = mw.wikibase.getAllStatements(qid, "P1813")
-- if there's a short name and this isn't the only item
if prop1813[1] and (#out > 0)then
local shortname
-- short name is monolingual text, so look for match to the local language
-- choose the shortest 'short name' in that language
for k, v in pairs(prop1813) do
if v.mainsnak.datavalue.value.language == langcode then
local name = v.mainsnak.datavalue.value.text
if (not shortname) or (#name < #shortname) then
shortname = name
end
end
end
-- add the shortname if one is found, fallback to the label
-- but skip it if it's "USA"
if shortname ~= "USA" then
out[#out+1] = shortname or labelOrId(qid)
else
if skip then out[#out+1] = "US" end
end
else
-- no shortname, so just add the label
local loc = labelOrId(qid)
-- exceptions go here:
if loc == "United States of America" then
out[#out+1] = "United States"
else
out[#out+1] = loc
end
end
finished = true
end
count = count + 1
until finished or count >= 10 -- limit to 10 levels to avoid infinite loops
if not first then table.remove(out, 1) end
return out
end
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-- Public functions
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-- getValue is used to get the value(s) of a property
-- The property ID is passed as the first unnamed parameter and is required.
-- A locally supplied parameter may optionaly be supplied as the second unnamed parameter.
-- The function will now also return qualifiers if parameter qual is supplied
-------------------------------------------------------------------------------
-- Dependencies: setRanks; parseInput; propertyvalueandquals; assembleoutput; parseParam; sourced;
-- labelOrId; i18n.latestdatequalifier; format_Date; makeOrdinal; roundto; decimalPrecision; decimalToDMS;
-------------------------------------------------------------------------------
p.getValue = function(frame)
if not frame.args[1] then
frame.args = frame:getParent().args
if not frame.args[1] then return i18n.errors["No property supplied"] end
end
-- parameter sets for commonly used groups of parameters
local paraset = tonumber(frame.args.ps or frame.args.parameterset or 0)
if paraset == 1 then
frame.args.rank = "best"
frame.args.fetchwikidata = "ALL"
frame.args.onlysourced = "no"
frame.args.noicon = "true"
elseif paraset == 2 then
-- second set goes here
end
local propertyID = mw.text.trim(frame.args[1] or "")
frame.args.reqranks = setRanks(frame.args.rank)
local entityid, props = parseInput(frame, frame.args[2], propertyID)
if not entityid then
return props -- either the input parameter or nothing
end
-- qual is a string containing the property ID of the qualifier(s) to be returned
-- if qual == "ALL" then all qualifiers returned
-- if qual == "DATES" then qualifiers P580 (start time) and P582 (end time) returned
-- if nothing or an empty string is passed set it nil -> no qualifiers returned
local qualID = mw.text.trim(frame.args.qual or ""):upper()
if qualID == "" then qualID = nil end
-- set a language object and code in the frame.args table
frame.args.langobj = findLang(frame.args.lang)
frame.args.lang = frame.args.langobj.code
-- table 'out' stores the return value(s):
local out = propertyvalueandquals(props, frame.args, qualID)
-- format the table of values and return it as a string:
return assembleoutput(out, frame.args, entityid, propertyID)
end
-------------------------------------------------------------------------------
-- getPreferredValue is used to get a value,
-- (or a comma separated list of them if multiple values exist).
-- If preferred ranks are set, it will return those values, otherwise values with normal ranks
-- now redundant to getValue with |rank=best
-------------------------------------------------------------------------------
-- Dependencies: p.getValue; setRanks; parseInput; propertyvalueandquals; assembleoutput;
-- parseParam; sourced; labelOrId; i18n.latestdatequalifier; format_Date;
-- makeOrdinal; roundto; decimalPrecision; decimalToDMS;
-------------------------------------------------------------------------------
p.getPreferredValue = function(frame)
frame.args.rank = "best"
return p.getValue(frame)
end
-------------------------------------------------------------------------------
-- getCoords is used to get coordinates for display in an infobox
-- whitelist and blacklist are implemented
-- optional 'display' parameter is allowed, defaults to "inline, title"
-------------------------------------------------------------------------------
-- Dependencies: setRanks(); parseInput(); decimalPrecision();
-------------------------------------------------------------------------------
p.getCoords = function(frame)
local propertyID = "P625"
-- if there is a 'display' parameter supplied, use it
-- otherwise default to "inline, title"
local disp = frame.args.display or ""
if disp == "" then
disp = "inline, title"
end
-- there may be a format parameter to switch from deg/min/sec to decimal degrees
-- default is deg/min/sec
-- decimal degrees needs |format = dec
local form = (frame.args.format or ""):lower():sub(1,3)
if form ~= "dec" then
form = "dms"
end
-- just deal with best values
frame.args.reqranks = setRanks("best")
local qid, props = parseInput(frame, frame.args[1], propertyID)
if not qid then
return props -- either local parameter or nothing
else
local dv = props[1].mainsnak.datavalue.value
local lat, long, prec = dv.latitude, dv.longitude, dv.precision
lat = decimalPrecision(lat, prec)
long = decimalPrecision(long, prec)
local lat_long = { lat, long }
lat_long["display"] = disp
lat_long["format"] = form
-- invoke template Coord with the values stored in the table
return frame:expandTemplate{title = 'coord', args = lat_long}
end
end
-------------------------------------------------------------------------------
-- getQualifierValue is used to get a formatted value of a qualifier
--
-- The call needs: a property (the unnamed parameter or 1=)
-- a target value for that property (pval=)
-- a qualifier for that target value (qual=)
-- The usual whitelisting and blacklisting of the property is implemented
-- The boolean onlysourced= parameter can be set to return nothing
-- when the property is unsourced (or only sourced to Wikipedia)
-------------------------------------------------------------------------------
-- Dependencies: parseParam(); setRanks(); parseInput(); sourced();
-- propertyvalueandquals(); assembleoutput();
-- labelOrId(); i18n.latestdatequalifier(); format_Date();
-- findLang(); makeOrdinal(); roundto(); decimalPrecision(); decimalToDMS();
-------------------------------------------------------------------------------
p.getQualifierValue = function(frame)
-- The property ID that will have a qualifier is the first unnamed parameter
local propertyID = mw.text.trim(frame.args[1] or "")
-- The value of the property we want to match whose qualifier value is to be returned
-- is passed in named parameter |pval=
local propvalue = frame.args.pval
-- The property ID of the qualifier
-- whose value is to be returned is passed in named parameter |qual=
local qualifierID = frame.args.qual
-- onlysourced is a boolean passed to return qualifiers
-- only when property values are sourced to something other than Wikipedia
-- if nothing or an empty string is passed set it true
-- if "false" or "no" or 0 is passed set it false
local onlysrc = parseParam(frame.args.onlysourced or frame.args.osd, true)
-- set a language object in the frame.args table
frame.args.langobj = findLang(frame.args.lang)
-- set the requested ranks flags
frame.args.reqranks = setRanks(frame.args.rank)
-- check for locally supplied parameter in second unnamed parameter
-- success means no local parameter and the property exists
local qid, props = parseInput(frame, frame.args[2], propertyID)
if qid then
local out = {}
-- Scan through the values of the property
-- we want something like property is P793, significant event (in propertyID)
-- whose value is something like Q385378, construction (in propvalue)
-- then we can return the value(s) of a qualifier such as P580, start time (in qualifierID)
for k1, v1 in pairs(props) do
if v1.mainsnak.snaktype == "value" and v1.mainsnak.datavalue.type == "wikibase-entityid" then
-- It's a wiki-linked value, so check if it's the target (in propvalue)
-- and if it has qualifiers
if v1.mainsnak.datavalue.value.id == propvalue and v1.qualifiers then
if onlysrc == false or sourced(v1) then
-- if we've got this far, we have a (sourced) claim with qualifiers
-- which matches the target, so find the value(s) of the qualifier we want
local quals = v1.qualifiers[qualifierID]
if quals then
-- can't reference qualifer, so set onlysourced = "no" (not boolean)
local qargs = frame.args
qargs.onlysourced = "no"
local vals = propertyvalueandquals(quals, qargs, qid)
for k, v in ipairs(vals) do
out[#out + 1] = v
end
end
end -- of check for sourced
end -- of check for matching required value and has qualifiers
end -- of check for wikibase entity
end -- of loop through values of propertyID
return assembleoutput(out, frame.args, qid, propertyID)
else
return props -- either local parameter or nothing
end -- of test for success
return nil
end
-------------------------------------------------------------------------------
-- getValueByQual gets the value of a property which has a qualifier with a given entity value
-- The call needs:
-- a property ID (the unnamed parameter or 1=Pxxx)
-- the ID of a qualifier for that property (qualID=Pyyy)
-- the Wikibase-entity ID of a value for that qualifier (qvalue=Qzzz)
-- The usual whitelisting, blacklisting, onlysourced, etc. are implemented
-------------------------------------------------------------------------------
-- Dependencies: _getvaluebyqual; parseParam; setRanks; parseInput; sourced;
-- assembleoutput;
-------------------------------------------------------------------------------
p.getValueByQual = function(frame)
local qualID = frame.args.qualID
-- The Q-id of the value for the qualifier we want to match is in named parameter |qvalue=
local qval = frame.args.qvalue or ""
if qval == "" then return "no qualifier value supplied" end
local function checkQID(id)
return id == qval
end
return _getvaluebyqual(frame, qualID, checkQID)
end
-------------------------------------------------------------------------------
-- getValueByLang gets the value of a property which has a qualifier P407
-- ("language of work or name") whose value has the given language code
-- The call needs:
-- a property ID (the unnamed parameter or 1=Pxxx)
-- the MediaWiki language code to match the language (lang=xx[-yy])
-- (if no code is supplied, it uses the default language)
-- The usual whitelisting, blacklisting, onlysourced, etc. are implemented
-------------------------------------------------------------------------------
-- Dependencies: _getvaluebyqual; parseParam; setRanks; parseInput; sourced; assembleoutput;
-------------------------------------------------------------------------------
p.getValueByLang = function(frame)
-- The language code for the qualifier we want to match is in named parameter |lang=
local langcode = frame.args.lang or ""
if langcode == "" then
langcode = frame:callParserFunction{ name = "int", args = "lang" }
end
local function checkLanguage(id)
-- id should represent a language like "British English (Q7979)"
-- it should have string property "Wikimedia language code (P424)"
-- qlcode will be a table:
local qlcode = mw.wikibase.getBestStatements(id, "P424")
if (#qlcode > 0) and (qlcode[1].mainsnak.datavalue.value == langcode) then
return true
end
end
return _getvaluebyqual(frame, "P407", checkLanguage)
end
-------------------------------------------------------------------------------
-- getValueByRefSource gets the value of a property which has a reference "stated in" (P248)
-- whose value has the given entity code.
-- The call needs:
-- a property ID (the unnamed parameter or 1=Pxxx)
-- the entity ID of a value to match where the reference is stated in (match=Qzzz)
-- The usual whitelisting, blacklisting, onlysourced, etc. are implemented
-------------------------------------------------------------------------------
-- Dependencies: parseParam; setRanks; parseInput; sourced; propertyvalueandquals assembleoutput;
-------------------------------------------------------------------------------
p.getValueByRefSource = function(frame)
-- The property ID that we want to check is the first unnamed parameter
local propertyID = mw.text.trim(frame.args[1] or ""):upper()
if propertyID == "" then return "no property supplied" end
-- The Q-id of the value we want to match is in named parameter |qvalue=
local qval = (frame.args.match or ""):upper()
if qval == "" then qval = "Q21540096" end
local unit = (frame.args.unit or ""):upper()
if unit == "" then unit = "Q4917" end
local onlysrc = parseParam(frame.args.onlysourced or frame.args.osd, true)
-- set the requested ranks flags
frame.args.reqranks = setRanks(frame.args.rank)
-- set a language object and code in the frame.args table
frame.args.langobj = findLang(frame.args.lang)
frame.args.lang = frame.args.langobj.code
local linked = parseParam(frame.args.linked, true)
local uabbr = parseParam(frame.args.uabbr or frame.args.unitabbr, false)
-- qid not nil means no local parameter and the property exists
local qid, props = parseInput(frame, frame.args[2], propertyID)
if qid then
local out = {}
local mlt= {}
for k1, v1 in ipairs(props) do
if onlysrc == false or sourced(v1) then
if v1.references then
for k2, v2 in ipairs(v1.references) do
if v2.snaks.P248 then
for k3, v3 in ipairs(v2.snaks.P248) do
if v3.datavalue.value.id == qval then
out[#out+1], mlt[#out+1] = rendersnak(v1, frame.args, linked, "", "", "", "", uabbr, unit)
if not mlt[#out] then
-- we only need one match per property value
-- unless datatype was monolingual text
break
end
end -- of test for match
end -- of loop through values "stated in"
end -- of test that "stated in" exists
end -- of loop through references
end -- of test that references exist
end -- of test for sourced
end -- of loop through values of propertyID
if #mlt > 0 then
local langcode = frame.args.lang
langcode = mw.text.split( langcode, '-', true )[1]
local fbtbl = mw.language.getFallbacksFor( langcode )
table.insert( fbtbl, 1, langcode )
local bestval = ""
local found = false
for idx1, lang1 in ipairs(fbtbl) do
for idx2, lang2 in ipairs(mlt) do
if (lang1 == lang2) and not found then
bestval = out[idx2]
found = true
break
end
end -- loop through values of property
end -- loop through fallback languages
if found then
-- replace output table with a table containing the best value
out = { bestval }
else
-- more than one value and none of them on the list of fallback languages
-- sod it, just give them the first one
out = { out[1] }
end
end
return assembleoutput(out, frame.args, qid, propertyID)
else
return props -- no property or local parameter supplied
end -- of test for success
end
-------------------------------------------------------------------------------
-- getPropOfProp takes two propertyIDs: prop1 and prop2 (as well as the usual parameters)
-- If the value(s) of prop1 are of type "wikibase-item" then it returns the value(s) of prop2
-- of each of those wikibase-items.
-- The usual whitelisting, blacklisting, onlysourced, etc. are implemented
-------------------------------------------------------------------------------
-- Dependencies: parseParam; setRanks; parseInput; sourced; propertyvalueandquals assembleoutput;
-------------------------------------------------------------------------------
p.getPropOfProp = function(frame)
frame.args.reqranks = setRanks(frame.args.rank)
frame.args.langobj = findLang(frame.args.lang)
frame.args.lang = frame.args.langobj.code
local args = frame.args
local pid1 = args.prop1 or args.pid1 or ""
local pid2 = args.prop2 or args.pid2 or ""
local localval = mw.text.trim(args[1] or "")
if pid1 == "" or pid2 == "" then return nil end
local qid1, statements1 = parseInput(frame, localval, pid1)
if not qid1 then return localval end
local onlysrc = parseParam(args.onlysourced or args.osd, true)
local maxvals = tonumber(args.maxvals) or 0
local qualID = mw.text.trim(args.qual or ""):upper()
if qualID == "" then qualID = nil end
local out = {}
for k, v in ipairs(statements1) do
if not onlysrc or sourced(v) then
local snak = v.mainsnak
if snak.datatype == "wikibase-item" and snak.snaktype == "value" then
local qid2 = snak.datavalue.value.id
local statements2 = {}
if args.reqranks.b then
statements2 = mw.wikibase.getBestStatements(qid2, pid2)
else
statements2 = mw.wikibase.getAllStatements(qid2, pid2)
end
if statements2[1] then
local out2 = propertyvalueandquals(statements2, args, qualID)
out[#out+1] = assembleoutput(out2, args, qid2, pid2)
end
end -- of test for valid property1 value
end -- of test for sourced
if maxvals > 0 and #out >= maxvals then break end
end -- of loop through values of property1
return assembleoutput(out, args, qid1, pid1)
end
-------------------------------------------------------------------------------
-- getAwardCat takes most of the usual parameters. If the item has values of P166 (award received),
-- then it examines each of those awards for P2517 (category for recipients of this award).
-- If it exists, it returns the corresponding category,
-- with the item's P734 (family name) as sort key, or no sort key if there is no family name.
-- The sort key may be overridden by the parameter |sortkey (alias |sk).
-- The usual whitelisting, blacklisting, onlysourced, etc. are implemented
-------------------------------------------------------------------------------
-- Dependencies: parseParam; setRanks; parseInput; sourced; propertyvalueandquals assembleoutput;
-------------------------------------------------------------------------------
p.getAwardCat = function(frame)
frame.args.reqranks = setRanks(frame.args.rank)
frame.args.langobj = findLang(frame.args.lang)
frame.args.lang = frame.args.langobj.code
local args = frame.args
args.sep = " "
local pid1 = args.prop1 or "P166"
local pid2 = args.prop2 or "P2517"
if pid1 == "" or pid2 == "" then return nil end
-- locally supplied value:
local localval = mw.text.trim(args[1] or "")
local qid1, statements1 = parseInput(frame, localval, pid1)
if not qid1 then return localval end
-- linkprefix (strip quotes)
local lp = (args.linkprefix or args.lp or ""):gsub('"', '')
-- sort key (strip quotes, hyphens and periods):
local sk = (args.sortkey or args.sk or ""):gsub('["-.]', '')
-- family name:
local famname = ""
if sk == "" then
local p734 = mw.wikibase.getBestStatements(qid1, "P734")[1]
local p734id = p734 and p734.mainsnak.snaktype == "value" and p734.mainsnak.datavalue.value.id or ""
famname = mw.wikibase.sitelink(p734id) or ""
-- strip namespace and disambigation
local pos = famname:find(":") or 0
famname = famname:sub(pos+1):gsub("%s%(.+%)$", "")
if famname == "" then
local lbl = mw.wikibase.label(p734id)
famname = lbl and mw.text.nowiki(lbl) or ""
end
end
local onlysrc = parseParam(args.onlysourced or args.osd, true)
local maxvals = tonumber(args.maxvals) or 0
local qualID = mw.text.trim(args.qual or ""):upper()
if qualID == "" then qualID = nil end
local out = {}
for k, v in ipairs(statements1) do
if not onlysrc or sourced(v) then
local snak = v.mainsnak
if snak.datatype == "wikibase-item" and snak.snaktype == "value" then
local qid2 = snak.datavalue.value.id
local statements2 = {}
if args.reqranks.b then
statements2 = mw.wikibase.getBestStatements(qid2, pid2)
else
statements2 = mw.wikibase.getAllStatements(qid2, pid2)
end
if statements2[1] and statements2[1].mainsnak.snaktype == "value" then
local qid3 = statements2[1].mainsnak.datavalue.value.id
local sitelink = mw.wikibase.sitelink(qid3)
sitelink = sitelink or mw.wikibase.label(qid3)
if sitelink then
if sk ~= "" then
out[#out+1] = "[[" .. lp .. sitelink .. "|" .. sk .. "]]"
elseif famname ~= "" then
out[#out+1] = "[[" .. lp .. sitelink .. "|" .. famname .. "]]"
else
out[#out+1] = "[[" .. lp .. sitelink .. "]]"
end -- of check for sort keys
end -- of test for sitelink
end -- of test for category
end -- of test for wikibase item has a value
end -- of test for sourced
if maxvals > 0 and #out >= maxvals then break end
end -- of loop through values of property1
return assembleoutput(out, args, qid1, pid1)
end
-------------------------------------------------------------------------------
-- getGlobe takes an optional qid of a Wikidata entity passed as |qid=
-- otherwise it uses the linked item for the current page.
-- If returns the Qid of the globe used in P625 (coordinate location),
-- or nil if there isn't one.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getGlobe = function(frame)
local qid = frame.args.qid or frame.args[1] or ""
if qid == "" then qid = mw.wikibase.getEntityIdForCurrentPage() end
local coords = mw.wikibase.getBestStatements(qid, "P625")[1]
local globeid
if coords and coords.mainsnak.snaktype == "value" then
globeid = coords.mainsnak.datavalue.value.globe:match("(Q%d+)")
end
return globeid
end
-------------------------------------------------------------------------------
-- getCommonsLink takes an optional qid of a Wikidata entity passed as |qid=
-- It returns one of the following in order of preference:
-- the Commons sitelink of the linked Wikidata item;
-- the Commons sitelink of the topic's main category of the linked Wikidata item;
-------------------------------------------------------------------------------
-- Dependencies: _getCommonslink(); _getSitelink(); parseParam()
-------------------------------------------------------------------------------
p.getCommonsLink = function(frame)
local oc = frame.args.onlycat or frame.args.onlycategories
local fb = parseParam(frame.args.fallback or frame.args.fb, true)
return _getCommonslink(frame.args.qid, oc, fb)
end
-------------------------------------------------------------------------------
-- getSitelink takes the qid of a Wikidata entity passed as |qid=
-- It takes an optional parameter |wiki= to determine which wiki is to be checked for a sitelink
-- If the parameter is blank, then it uses the local wiki.
-- If there is a sitelink to an article available, it returns the plain text link to the article
-- If there is no sitelink, it returns nil.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getSiteLink = function(frame)
return _getSitelink(frame.args.qid, frame.args.wiki or mw.text.trim(frame.args[1] or ""))
end
-------------------------------------------------------------------------------
-- getLink has the qid of a Wikidata entity passed as the first unnamed parameter or as |qid=
-- If there is a sitelink to an article on the local Wiki, it returns a link to the article
-- with the Wikidata label as the displayed text.
-- If there is no sitelink, it returns the label as plain text.
-- If there is no label in the local language, it displays the qid instead.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getLink = function(frame)
local itemID = mw.text.trim(frame.args[1] or frame.args.qid or "")
if itemID == "" then return end
local sitelink = mw.wikibase.sitelink(itemID)
local label = labelOrId(itemID)
if sitelink then
return "[[:" .. sitelink .. "|" .. label .. "]]"
else
return label
end
end
-------------------------------------------------------------------------------
-- getLabel has the qid of a Wikidata entity passed as the first unnamed parameter or as |qid=
-- It returns the Wikidata label for the local language as plain text.
-- If there is no label in the local language, it displays the qid instead.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getLabel = function(frame)
local itemID = mw.text.trim(frame.args[1] or frame.args.qid or "")
if itemID == "" then return end
local label = labelOrId(itemID)
return label
end
-------------------------------------------------------------------------------
-- getAT has the qid of a Wikidata entity passed as the first unnamed parameter or as |qid=
-- If there is a sitelink to an article on the local Wiki, it returns the sitelink as plain text.
-- If there is no sitelink, it returns nothing.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getAT = function(frame)
local itemID = mw.text.trim(frame.args[1] or frame.args.qid or "")
if itemID == "" then return end
return mw.wikibase.sitelink(itemID)
end
-------------------------------------------------------------------------------
-- getDescription has the qid of a Wikidata entity passed as |qid=
-- (it defaults to the associated qid of the current article if omitted)
-- and a local parameter passed as the first unnamed parameter.
-- Any local parameter passed (other than "Wikidata" or "none") becomes the return value.
-- It returns the article description for the Wikidata entity if the local parameter is "Wikidata".
-- Nothing is returned if the description doesn't exist or "none" is passed as the local parameter.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getDescription = function(frame)
local desc = mw.text.trim(frame.args[1] or "")
local itemID = mw.text.trim(frame.args.qid or "")
if itemID == "" then itemID = nil end
if desc:lower() == 'wikidata' then
return mw.wikibase.description(itemID)
elseif desc:lower() == 'none' then
return nil
else
return desc
end
end
-------------------------------------------------------------------------------
-- getAliases has the qid of a Wikidata entity passed as |qid=
-- (it defaults to the associated qid of the current article if omitted)
-- and a local parameter passed as the first unnamed parameter.
-- It implements blacklisting and whitelisting with a field name of "alias" by default.
-- Any local parameter passed becomes the return value.
-- Otherwise it returns the aliases for the Wikidata entity with the usual list options.
-- Nothing is returned if the aliases do not exist.
-------------------------------------------------------------------------------
-- Dependencies: findLang(); assembleoutput()
-------------------------------------------------------------------------------
p.getAliases = function(frame)
local args = frame.args
local fieldname = args.name or ""
if fieldname == "" then fieldname = "alias" end
local blacklist = args.suppressfields or args.spf or ""
if blacklist:find(fieldname) then return nil end
local localval = mw.text.trim(args[1] or "")
if localval ~= "" then return localval end
local whitelist = args.fetchwikidata or args.fwd or ""
if whitelist == "" then whitelist = "NONE" end
if not (whitelist == 'ALL' or whitelist:find(fieldname)) then return nil end
local qid = mw.text.trim(args.qid or "")
if qid == "" then qid = nil end
local entity = mw.wikibase.getEntity(qid)
if not entity then return nil end
local aliases = entity.aliases
if not aliases then return nil end
if not qid then qid= mw.wikibase.getEntityIdForCurrentPage() end
args.langobj = findLang(args.lang)
local langcode = args.langobj.code
args.lang = langcode
local out = {}
for k1, v1 in pairs(aliases) do
if v1[1].language == langcode then
for k1, v2 in ipairs(v1) do
out[#out+1] = v2.value
end
break
end
end
return assembleoutput(out, args, qid)
end
-------------------------------------------------------------------------------
-- pageId returns the page id (entity ID, Qnnn) of the current page
-- returns nothing if the page is not connected to Wikidata
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.pageId = function(frame)
return mw.wikibase.getEntityIdForCurrentPage()
end
-------------------------------------------------------------------------------
-- formatDate is a wrapper to export the private function format_Date
-------------------------------------------------------------------------------
-- Dependencies: format_Date();
-------------------------------------------------------------------------------
p.formatDate = function(frame)
return format_Date(frame.args[1], frame.args.df, frame.args.bc)
end
-------------------------------------------------------------------------------
-- location is a wrapper to export the private function _location
-- it takes the entity-id as qid or the first unnamed parameter
-- optional boolean parameter first toggles the display of the first item
-- optional boolean parameter skip toggles the display to skip to the last item
-------------------------------------------------------------------------------
-- Dependencies: _location();
-------------------------------------------------------------------------------
p.location = function(frame)
local qid = mw.text.trim(frame.args.qid or frame.args[1] or ""):upper()
if qid == "" then return "No id supplied" end
local first = mw.text.trim(frame.args.first or "")
local skip = mw.text.trim(frame.args.skip or "")
return table.concat( _location(qid, first, skip), ", " )
end
-------------------------------------------------------------------------------
-- checkBlacklist implements a test to check whether a named field is allowed
-- returns true if the field is not blacklisted (i.e. allowed)
-- returns false if the field is blacklisted (i.e. disallowed)
-- {{#if:{{#invoke:WikidataIB |checkBlacklist |name=Joe |suppressfields=Dave; Joe; Fred}} | not blacklisted | blacklisted}}
-- displays "blacklisted"
-- {{#if:{{#invoke:WikidataIB |checkBlacklist |name=Jim |suppressfields=Dave; Joe; Fred}} | not blacklisted | blacklisted}}
-- displays "not blacklisted"
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.checkBlacklist = function(frame)
local blacklist = frame.args.suppressfields or frame.args.spf or ""
local fieldname = frame.args.name or ""
if blacklist ~= "" and fieldname ~= "" then
if blacklist:find(fieldname) then
return false
else
return true
end
else
-- one of the fields is missing: let's call that "not on the list"
return true
end
end
-------------------------------------------------------------------------------
-- emptyor returns nil if its first unnamed argument is just punctuation, whitespace or html tags
-- otherwise it returns the argument unchanged (including leading/trailing space).
-- If the argument may contain "=", then it must be called explicitly:
-- |1=arg
-- (In that case, leading and trailing spaces are trimmed)
-- It finds use in infoboxes where it can replace tests like:
-- {{#if: {{#invoke:WikidatIB |getvalue |P99 |fwd=ALL}} | <span class="xxx">{{#invoke:WikidatIB |getvalue |P99 |fwd=ALL}}</span> | }}
-- with a form that uses just a single call to Wikidata:
-- {{#invoke |WikidataIB |emptyor |1= <span class="xxx">{{#invoke:WikidataIB |getvalue |P99 |fwd=ALL}}</span> }}
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.emptyor = function(frame)
local s = frame.args[1] or ""
if s == "" then return nil end
local sx = s:gsub("%s", ""):gsub("<[^>]*>", ""):gsub("%p", "")
if sx == "" then
return nil
else
return s
end
end
-------------------------------------------------------------------------------
-- labelorid is a public function to expose the output of labelOrId()
-- Pass the Q-number as |qid= or as an unnamed parameter.
-- It returns the Wikidata label for that entity or the qid if no label exists.
-------------------------------------------------------------------------------
-- Dependencies: labelOrId
-------------------------------------------------------------------------------
p.labelorid = function(frame)
local label = labelOrId( frame.args.qid or frame.args[1] )
return label
end
-------------------------------------------------------------------------------
-- getLang returns the MediaWiki language code of the current content.
-- If optional parameter |style=full, it returns the language name.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getLang = function(frame)
local style = (frame.args.style or ""):lower()
local langcode = mw.language.getContentLanguage().code
if style == "full" then
return mw.language.fetchLanguageName( langcode )
end
return langcode
end
-------------------------------------------------------------------------------
-- findLanguage exports the local findLang() function
-- It takes an optional language code and returns, in order of preference:
-- the code if a known language;
-- the user's language, if set;
-- the server's content language.
-------------------------------------------------------------------------------
-- Dependencies: findLang
-------------------------------------------------------------------------------
p.findLanguage = function(frame)
return findLang(frame.args.lang or frame.args[1]).code
end
-------------------------------------------------------------------------------
-- getQid returns the qid, if supplied
-- failing that, the Wikidata entity ID of the "category's main topic (P301)", if it exists
-- failing that, the Wikidata entity ID asociated with the curent page, if it exists
-- otherwise, nothing
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getQid = function(frame)
local qid = (frame.args.qid or ""):upper()
-- check if a qid was passed; if so, return it:
if qid ~= "" then return qid end
-- check if there's a "category's main topic (P301)":
qid = mw.wikibase.getEntityIdForCurrentPage()
if qid then
local prop301 = mw.wikibase.getBestStatements(qid, "P301")
if prop301[1] then
local mctid = prop301[1].mainsnak.datavalue.value.id
if mctid then return mctid end
end
end
-- otherwise return the page qid (if any)
return qid
end
-------------------------------------------------------------------------------
-- followQid takes two optional parameters: qid and props
-- If qid is not given, it uses the qid for the connected page
-- or returns nil if there isn't one.
-- props is a list of properties, separated by punctuation.
-- If props is given, the Wikidata item for the qid is examined for each property in turn.
-- If that property contains a value that is another Wikibase-item, that item's qid is returned,
-- and the search terminates.
-- If props is not given, the qid is returned.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.followQid = function(frame)
local qid = (frame.args.qid or ""):upper()
if qid == "" then
qid = mw.wikibase.getEntityIdForCurrentPage()
end
if not qid then return nil end
local props = (frame.args.props or ""):upper()
if props ~= "" then
for p in mw.text.gsplit(props, "%p") do -- split at punctuation and iterate
p = mw.text.trim(p)
for i, v in ipairs( mw.wikibase.getBestStatements(qid, p) ) do
local linkedid = v.mainsnak.datavalue and v.mainsnak.datavalue.value.id
if linkedid then
return linkedid
end
end -- loop through values of property to follow
end -- loop through list of properties to follow
end
return qid
end
-------------------------------------------------------------------------------
-- siteID returns the root of the globalSiteID
-- e.g. "en" for "enwiki", "enwikisource", etc.
-- treats "en-gb" as "en", etc.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.siteID = function(frame)
local txtlang = frame:preprocess( "{{int:lang}}" ) or ""
-- This deals with specific exceptions: be-tarask -> be-x-old
if txtlang == "be-tarask" then
return "be_x_old"
end
local pos = txtlang:find("-")
local ret = ""
if pos then
ret = txtlang:sub(1, pos-1)
else
ret = txtlang
end
return ret
end
-------------------------------------------------------------------------------
-- projID returns the code used to link to the reader's language's project
-- e.g "en" for [[:en:WikidataIB]]
-- treats "en-gb" as "en", etc.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.projID = function(frame)
local txtlang = frame:preprocess( "{{int:lang}}" ) or ""
-- This deals with specific exceptions: be-tarask -> be-x-old
if txtlang == "be-tarask" then
return "be-x-old"
end
local pos = txtlang:find("-")
local ret = ""
if pos then
ret = txtlang:sub(1, pos-1)
else
ret = txtlang
end
return ret
end
-------------------------------------------------------------------------------
-- formatNumber formats a number according to the the supplied language code ("|lang=")
-- or the default language if not supplied.
-- The number is the first unnamed parameter or "|num="
-------------------------------------------------------------------------------
-- Dependencies: findLang()
-------------------------------------------------------------------------------
p.formatNumber = function(frame)
local lang
local num = tonumber(frame.args[1] or frame.args.num) or 0
lang = findLang(frame.args.lang)
return lang:formatNum( num )
end
-------------------------------------------------------------------------------
-- examine dumps the property (the unnamed parameter or pid)
-- from the item given by the parameter 'qid' (or the other unnamed parameter)
-- or from the item corresponding to the current page if qid is not supplied.
-- e.g. {{#invoke:WikidataIB |examine |pid=P26 |qid=Q42}}
-- or {{#invoke:WikidataIB |examine |P26 |Q42}} or any combination of these
-- or {{#invoke:WikidataIB |examine |P26}} for the current page.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.examine = function( frame )
local args
if frame.args[1] or frame.args.pid or frame.args.qid then
args = frame.args
else
args = frame:getParent().args
end
local par = {}
local pid = (args.pid or ""):upper()
local qid = (args.qid or ""):upper()
par[1] = mw.text.trim( args[1] or "" ):upper()
par[2] = mw.text.trim( args[2] or "" ):upper()
table.sort(par)
if par[2]:sub(1,1) == "P" then par[1], par[2] = par[2], par[1] end
if pid == "" then pid = par[1] end
if qid == "" then qid = par[2] end
if pid:sub(1,1) ~= "P" then return "No property supplied" end
if qid:sub(1,1) ~= "Q" then qid = mw.wikibase.getEntityIdForCurrentPage() end
if not qid then return "No item for this page" end
return "<pre>" .. mw.dumpObject( mw.wikibase.getAllStatements( qid, pid ) ) .. "</pre>"
end
-------------------------------------------------------------------------------
-- checkvalue looks for 'val' as a wikibase-item value of a property (the unnamed parameter or pid)
-- from the item given by the parameter 'qid'
-- or from the Wikidata item associated with the current page if qid is not supplied.
-- If property is not supplied, then P31 (instance of) is assumed.
-- It returns val if found or nothing if not found.
-- e.g. {{#invoke:WikidataIB |checkvalue |val=Q5 |pid=P31 |qid=Q42}}
-- or {{#invoke:WikidataIB |checkvalue |val=Q5 |P31 |qid=Q42}}
-- or {{#invoke:WikidataIB |checkvalue |val=Q5 |qid=Q42}}
-- or {{#invoke:WikidataIB |checkvalue |val=Q5 |P31}} for the current page.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.checkvalue = function( frame )
local args
if frame.args.val then
args = frame.args
else
args = frame:getParent().args
end
local val = args.val
if not val then return nil end
local pid = mw.text.trim(args.pid or args[1] or "P31"):upper()
local qid = (args.qid or ""):upper()
if pid:sub(1,1) ~= "P" then return nil end
if qid:sub(1,1) ~= "Q" then qid = mw.wikibase.getEntityIdForCurrentPage() end
if not qid then return nil end
local stats = mw.wikibase.getAllStatements( qid, pid )
if not stats[1] then return nil end
if stats[1].mainsnak.datatype == "wikibase-item" then
for k, v in pairs( stats ) do
if v.mainsnak.snaktype == "value" and v.mainsnak.datavalue.value.id == val then
return val
end
end
end
return nil
end
-------------------------------------------------------------------------------
-- url2 takes a parameter url= that is a proper url and formats it for use in an infobox.
-- If no parameter is supplied, it returns nothing.
-- This is the equivalent of Template:URL
-- but it keeps the "edit at Wikidata" pen icon out of the microformat.
-- Usually it will take its url parameter directly from a Wikidata call:
-- e.g. {{#invoke:WikidataIB |url2 |url={{wdib |P856 |qid=Q23317 |fwd=ALL |osd=no}}
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.url2 = function(frame)
local txt = frame.args.url or ""
if txt == "" then return nil end
local url, icon = txt:match("(.+) (.+)")
url = url or txt
icon = icon or ""
local prot, addr = url:match("(http[s]*://)(.+)")
prot = prot or url
addr = addr or ""
local disp, n = addr:gsub("%.", "<wbr/>%.")
return '<span class="url">[' .. prot .. addr .. " " .. disp .. "]</span> " .. icon
end
-------------------------------------------------------------------------------
-- getWebsite fetches the Official website (P856) and formats it for use in an infobox.
-- This is similar to Template:Official website but with a url displayed,
-- and it adds the "edit at Wikidata" pen icon beyond the microformat if enabled.
-- A local value will override the Wikidata value. "NONE" returns nothing.
-- e.g. {{#invoke:WikidataIB |getWebsite |qid= |noicon= |lang= |url= }}
-------------------------------------------------------------------------------
-- Dependencies: findLang(); parseParam();
-------------------------------------------------------------------------------
p.getWebsite = function(frame)
local url = frame.args.url or ""
if url:upper() == "NONE" then return nil end
local qid = frame.args.qid or ""
if qid == "" then qid = mw.wikibase.getEntityIdForCurrentPage() end
if not qid then return nil end
local urls = {}
local quals = {}
if url == "" then
local prop856 = mw.wikibase.getBestStatements(qid, "P856")
for k, v in pairs(prop856) do
if v.mainsnak.snaktype == "value" then
urls[#urls+1] = v.mainsnak.datavalue.value
if v.qualifiers and v.qualifiers["P1065"] then
-- just take the first archive url (P1065)
local au = v.qualifiers["P1065"][1]
if au.snaktype == "value" then
quals[#urls] = au.datavalue.value
end -- test for archive url having a value
end -- test for qualifers
end -- test for website having a value
end -- loop through website(s)
else
urls[1] = url
end
if #urls == 0 then return nil end
local out = {}
for i, u in ipairs(urls) do
local link = quals[i] or u
local prot, addr = u:match("(http[s]*://)(.+)")
addr = addr or u
local disp, n = addr:gsub("%.", "<wbr/>%.")
out[#out+1] = '<span class="url">[' .. link .. " " .. disp .. "]</span>"
end
local langcode = findLang(frame.args.lang).code
local noicon = parseParam(frame.args.noicon, false)
if url == "" and not noicon then
out[#out] = out[#out] .. createicon(langcode, qid, "P856")
end
local ret = ""
if #out > 1 then
ret = mw.getCurrentFrame():expandTemplate{title = "ubl", args = out}
else
ret = out[1]
end
return ret
end
-------------------------------------------------------------------------------
-- getAllLabels fetches the set of labels and formats it for display as wikitext.
-- It takes a parameter 'qid' for arbitrary access, otherwise it uses the current page.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getAllLabels = function(frame)
local args = frame.args or frame:getParent().args or {}
local qid = args.qid
if qid == "" then qid = nil end
local entity = mw.wikibase.getEntity(qid)
if not entity then return i18n["entity-not-found"] end
local labels = entity.labels
if not labels then return i18n["labels-not-found"] end
local out = {}
for k, v in pairs(labels) do
out[#out+1] = v.value .. " (" .. v.language .. ")"
end
return table.concat(out, "; ")
end
-------------------------------------------------------------------------------
-- getAllDescriptions fetches the set of descriptions and formats it for display as wikitext.
-- It takes a parameter 'qid' for arbitrary access, otherwise it uses the current page.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getAllDescriptions = function(frame)
local args = frame.args or frame:getParent().args or {}
local qid = args.qid
if qid == "" then qid = nil end
local entity = mw.wikibase.getEntity(qid)
if not entity then return i18n["entity-not-found"] end
local descriptions = entity.descriptions
if not descriptions then return i18n["descriptions-not-found"] end
local out = {}
for k, v in pairs(descriptions) do
out[#out+1] = v.value .. " (" .. v.language .. ")"
end
return table.concat(out, "; ")
end
-------------------------------------------------------------------------------
-- getAllAliases fetches the set of aliases and formats it for display as wikitext.
-- It takes a parameter 'qid' for arbitrary access, otherwise it uses the current page.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.getAllAliases = function(frame)
local args = frame.args or frame:getParent().args or {}
local qid = args.qid
if qid == "" then qid = nil end
local entity = mw.wikibase.getEntity(qid)
if not entity then return i18n["entity-not-found"] end
local aliases = entity.aliases
if not aliases then return i18n["aliases-not-found"] end
local out = {}
for k1, v1 in pairs(aliases) do
local lang = v1[1].language
local val = {}
for k1, v2 in ipairs(v1) do
val[#val+1] = v2.value
end
out[#out+1] = table.concat(val, ", ") .. " (" .. lang .. ")"
end
return table.concat(out, "; ")
end
-------------------------------------------------------------------------------
-- showNoLinks displays the article titles that should not be linked.
-------------------------------------------------------------------------------
-- Dependencies: none
-------------------------------------------------------------------------------
p.showNoLinks = function(frame)
local out = {}
for k, v in pairs(donotlink) do
out[#out+1] = k
end
table.sort( out )
return table.concat(out, "; ")
end
return p
-------------------------------------------------------------------------------
-- List of exported functions
-------------------------------------------------------------------------------
-- getValue
-- getPreferredValue
-- getCoords
-- getQualifierValue
-- getValueByQual
-- getValueByLang
-- getLink
-- getLabel
-- getAT
-- getDescription
-- getAliases
-- pageId
-- formatDate
-- location
-- checkBlacklist
-- emptyor
-- labelorid
-- getLang
-- findLanguage
-- getQID
-- followQid
-- siteID
-- projID
-- formatNumber
-- examine
-- checkvalue
-- url2
-- getWebsite
-- getAllLabels
-- getAllDescriptions
-- getAllAliases
-------------------------------------------------------------------------------